PR6003-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The PR6003-T diode single rectifier provides a wide range of current and voltage ratings, making it suitable for many applications. A rectifier is an electrical device that is used to convert alternating current (AC) to direct current (DC). It does this by allowing current to flow in only one direction. The PR6003-T diode is a single type of rectifier, which is designed to convert AC current to DC with very low loss. This makes it ideal for applications in switching power supplies, DC motor drives, distributed power systems and other power management applications.

The PR6003-T diode is a self-commutated single-phase thyristor rectifier, which is available in three case style options – SuperMini, TO-220 and TO-247 packages. The SuperMini package has a power rating of 600 Volt, a current rating of 30 Amps and a peak repetitive reverse voltage rating of 600 Volts. The TO-220 package is rated at 800 Volt, 30 Amps and 800 Volt peak repetitive reverse voltage. Both the SuperMini and TO-220 packages feature a common cathode pin, which can be connected directly to the anode of the switch mode power supply. The TO-247 package has a power rating of 800 Volt, a current rating of 60 Amps and a peak repetitive reverse voltage rating of 800 Volt.

In terms of electrical parameters, the PR6003-T diode has a forward voltage drop of 2.15 volts, a junction temperature of -60°C to +150°C and a recovery time of 100ns. It is rated for a maximum reverse current of 5mA, an operating temperature range of -25°C to +125°C, and a reverse recovery time of 40ns. It also has an insulated gate current of 1A, which allows it to be used in switching applications with higher current requirements. Additionally, it has an RMS current rating of 30A and a forward surge current rating of 120A.

In terms of its working principle, when an AC voltage is applied to the PR6003-T diode, a small current flows through the anode side of the device. This current causes the device to turn on and create a short-circuit between the anode and the cathode. As this short-circuit is created, a voltage drop appears across the diode, which rectifies the AC voltage and converts it to DC voltage. As the current is changed, the PR6003-T diode will turn off, thus breaking the short-circuit and replicating the opposite sides of the AC waveform. This process is repeated for every alternating cycle, resulting in a rectified output voltage.

The PR6003-T diode single rectifier is a versatile device that is suitable for many applications. It is available in a range of power ratings, current ratings and peak repetitive reverse voltage ratings. Additionally, it is suitable for switching applications due to its low forward voltage drop, its high forward surge current rating, and its insulated gate current rating. Its fast recovery time allows it to be used in high-speed applications, such as those involving motors. The PR6003-T diode is an ideal device for a wide range of AC to DC conversion applications.

The specific data is subject to PDF, and the above content is for reference