PS2535L-1-A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are devices that use a light emitting diode (LED) and a photodetector, such as a phototransistor, to provide electrical isolation between two circuits. The PS2535L-1-A is a popular optoisolator that is widely used in various applications. This article will discuss the applications and working principles of the PS2535L-1-A.

The PS2535L-1-A is a transistor output optoisolator that is well-suited for bidirectional switch control applications. It can be used in microprocessor control systems, logical control systems, and analog control systems. It is also used in surge suppression circuits, power supply circuits, and low-voltage AC/DC switching circuits. The PS2535L-1-A is especially useful in circuits that require both high noise immunity and voltage isolation.

In its simplest form, the device consists of an LED and a phototransistor separated by an electrical insulator. The LED emits light when a current is applied to it. The light is detected by the phototransistor and converted into an electrical signal. This signal is then output from the device, providing electrical isolation between the two circuits. The device can also be used as a switch, with the LED turning on and off whenever the current passes through it.

The PS2535L-1-A is designed to provide excellent electrical and optical isolation between one side of the device and the other. It has a maximum isolation voltage rating of 3000 V and a minimum operating temperature range of -40°C to +105°C. In addition, it has a high noise immunity rating of 10 kV/μs and a high speed switching time of 4 μs.

The PS2535L-1-A is a versatile optoisolator that is suitable for a wide variety of applications. In addition to switch control applications, it is also used in AFE loops, opto-coupler circuits, signal isolators, logic levels, photo-isolating circuits, and 4–20 ma current loops. In addition, it is commonly used as a DC/DC converter or as part of a linear power supply.

When using the PS2535L-1-A, it is important to ensure that the operating voltage rating is not exceeded. In addition, the device should not be exposed to high temperatures, such as those encountered in baked solder connections. The LED should also be protected from direct sunlight and other sources of intense light. Failure to do so could result in device failure.

In summary, the PS2535L-1-A is a popular optoisolator that is used in a variety of applications. It provides excellent electrical and optical isolation between one side of the device and the other, and can be used as a switch or part of a linear power supply. However, it is important to ensure that its operating voltage rating is not exceeded, and that the LED is not exposed to high temperatures or intense light.

The specific data is subject to PDF, and the above content is for reference