PS2561L-1-V-L-A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic isolation components that are designed to provide galvanic separation between two circuits. Optoisolators are commonly used in applications where two circuits must interface without direct physical contact or connection. The PS2561L-1-V-L-A is an optoisolator device, specifically classified as a transistor-photovoltaic output optoisolator.

The PS2561L-1-V-L-A consists of a light emitting diode, typically an infrared LED integrated inside a small epoxy package. The package contains an additional photodiode that detects the light emitted from the LED when it is illuminated. It is a “photovoltaic” type optoisolator, meaning that the photovoltaic cell converts the incident light into an electrical current, or voltage. This output voltage is then used to control a “switch”, usually a single transistor.

The purpose of the optoisolator device is to provide a means of communication between two isolated systems, as well as a means of protection between the circuits. The optoisolator operates by changing the current from the input side via the isolation barrier (in this case the LED) to the output side (the photodiode). The photodiode will generate a signal based on the current drive from the LED, thus controlling the current drive on the output side. In a sense, the optoisolator acts as an “amplifier”, increasing the signal strength from the input side.

In addition to providing an isolation barrier between two circuits, optoisolators can also offer surge protection or current limiting. The current limiting feature of the optoisolator limits the voltage and current generated on the output side by controlling the photodiode output. This prevents voltage spikes or large current surges, thus providing added robustness to the circuit.

The PS2561L-1-V-L-A is commonly used in applications that require electrical isolation between two circuits, such as high voltage applications or data transmission signals. It is also ideal for applications where protection against transient or voltage spikes is necessary, as these can easily damage electronic components. In short, the PS2561L-1-V-L-A is an excellent optoisolator device as it provides galvanic isolation, protection, and current limiting.

The specific data is subject to PDF, and the above content is for reference