PS2561DL-1Y-F3-A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic isolators that use a combination of light and electronics to safely separate control signals from power circuits. Optoisolators with transistor, photovoltaic output, or with both are available. The PS2561DL-1Y-F3-A is one such optoisolator with transistor, photovoltaic output. This optoisolator has a peak collector-emitter voltage rating of 55 V and a collector-emitter saturation voltage rating of 7.0 mV.

The PS2561DL-1Y-F3-A has many applications in the field of electrical engineering. It can be used in many circuit designs, including motor control, power supplies, HVAC (heating, ventilation, and air conditioning) applications, and more. The device’s internal electrical isolation eliminates interference and thereby, shielding control signals from any electrical noise within the housing. Furthermore, the optoisolator can be used as an interface with regulators, such as thyristors, TRIACs, and IGBT drivers.

As for the working principle of the PS2561DL-1Y-F3-A, it consists of two parts: an LED (light emitting diode) and a phototransistor. The LED is light activated and is usually powered by a current with a value in the range of 0.5 to 5 mA. When the LED is activated, it emits light which is then detected by the phototransistor, leading to a change in the output current. The output current of the PS2561DL-1Y-F3-A then fluctuates based on the amount of received light. This allows for the isolation of input signals from output signals.

The PS2561DL-1Y-F3-A is further equipped with several features including an on/off control function and a low-power output circuit. It can be powered by a supply voltage in the range of 1.5 to 30 V. Additionally, its insulation rating of 5000 Vrms eliminates the possibility of short-circuiting. These safety features are built into the optoisolator so as to ensure safety when using electrical and electronic equipment.

In conclusion, the PS2561DL-1Y-F3-A optoisolator with transistor, photovoltaic output has a variety of applications in the field of electrical engineering and its working principle is based on two parts – an LED and a phototransistor. This optoisolator provides electrical isolation between input and output signals, and is also equipped with several safety features to ensure safety in operation. Therefore, the PS2561DL-1Y-F3-A optoisolator can be used with confidence in numerous applications.

The specific data is subject to PDF, and the above content is for reference