PS7801J-1A-F3-A Relays |
|
Allicdata Part #: | PS7801J-1A-F3-ATR-ND |
Manufacturer Part#: |
PS7801J-1A-F3-A |
Price: | $ 0.00 |
Product Category: | Relays |
Manufacturer: | CEL |
Short Description: | SSR OCMOS FET 160MA 1CH 4-USFL |
More Detail: | Solid State Relay SPST-NO (1 Form A) 4-SMD (0.165"... |
DataSheet: | PS7801J-1A-F3-A Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | PS, OCMOS |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Mounting Type: | Surface Mount |
Circuit: | SPST-NO (1 Form A) |
Output Type: | AC, DC |
Voltage - Input: | 1.1VDC |
Voltage - Load: | 0V ~ 20V |
Load Current: | 160mA |
On-State Resistance (Max): | 3.2 Ohms |
Termination Style: | SMD (SMT) Tab |
Package / Case: | 4-SMD (0.165", 4.20mm) |
Supplier Device Package: | 4-Ultra Small Flatlead |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A solid state relay (SSR) is an electrical component used to switch an electrical circuit and typically integrates into a single unit a power semiconductor block, a heat sink, and a control circuit. It can control multiple amperage and voltage levels, ranging from a few milliamps up to several amps and tens of volts up to hundreds or kilovolts. The PS7801J-1A-F3-A is an example of a solid state relay.
The PS7801J-1A-F3-A solid state relay is a three-terminal device with electromechanical relay contacts. It is designed to be used as a direct current (DC) switch, meaning that it is intended to provide reliable switching of DC circuits. It has a low input current of 1mA at 12V, making it suitable for most DC current applications. Its integrated power semiconductor block allows it to function as a high-voltage switch, allowing it to switch voltages up to 300V DC without the need for additional components. The PS7801J-1A-F3-A uses zero-crossing technology, which allows it to make measurements and take appropriate action without affecting the quality of the signal being switched.
The PS7801J-1A-F3-A is most commonly used in industrial and domestic applications. It can be used to switch DC loads, such as motors, solenoids, and lamps, and can be used to control DC circuits, such as on/off heating, ventilation, and air conditioning (HVAC) systems. It is also commonly used in medical, factory automation, and aviation applications. In addition, it can be used in multiple switch configurations such as SPDT, DPDT, and multi-contact configurations. The PS7801J-1A-F3-A is an ideal choice for a wide range of DC-switched applications.
The PS7801J-1A-F3-A utilizes a Zero-Crossing switching mechanism, which allows it to minimize any impact on the circuit being switched. When the input voltage is high, the power semiconductor is turned on and the relay contact is activated. When the input voltage drops below a certain threshold, the power semiconductor is turned off and the relay contact is deactivated. This method of switching ensures that any disturbances in power, such as voltage spikes and noise, are minimized and that the integrity of the signal is maintained.
The PS7801J-1A-F3-A is designed to be easily installed. Its three-terminal design allows it to be connected to a circuit board with minimal soldering. The power semiconductor block can be replaced in the event of an overheating failure, making maintenance of the relay simple and cost-effective. Its thermal protection system prevents overheating or excessive current draw and its built-in surge protection system protects the device from power surges.
The PS7801J-1A-F3-A solid state relay is a reliable and cost-effective device for DC switching applications. Its Zero-Crossing switching mechanism ensures that signals are maintained and minimizes the impact of power disturbances. Its three-terminal design makes installation and maintenance simple and its high voltage switching capabilities make it ideal for a wide range of industrial applications. The PS7801J-1A-F3-A is a great choice for any DC switching needs.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PS7801E-1A-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 150MA NO 4-... |
PS7801E-1A-F3-A | CEL | -- | 1000 | SSR OCMOS FET 150MA NO 4-... |
PS7801-1A-F3-A | CEL | -- | 1000 | SSR OCMOS FET 100MA NO 4-... |
PS7801J-1A-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 160MA 1CH 4... |
PS7801K-1A-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 40MA 1CH 4-... |
PS7804-1A-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 400MA 1CH 4... |
PS7801J-1A-F3-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 160MA 1CH 4... |
PS7802B-1A-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 240MA NO 4-... |
PS7801P-1A-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 150MA NO 4-... |
PS7801K-1A-F3-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 40MA 1CH 4-... |
PS7804-1A-F3-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 400MA 1CH 4... |
PS7804A-1A-A | CEL | 0.0 $ | 1000 | SSR LOW OUTPUT CAP 4-SOPS... |
PS7801C-1A-A | CEL | 7.65 $ | 3 | SSR OCMOS FET 80MA NO 4-U... |
PS7802-1A-A | CEL | 0.0 $ | 1000 | SSR OCMOS FET 250MA NO 4-... |
PS7802-1A-F3-A | CEL | -- | 1000 | SSR OCMOS FET 250MA NO 4-... |
SSR ZERO SW 480V 16ASolid State
RELAY SSR SPST-NO 20V 4USOPSolid State R...
RELAY DUAL 25A 240V ZC 4-15VDCSolid Stat...
CTRLR TEMP SSR 480V 90A AC OUTSolid Stat...
CTRLR TEMP SSR 240V 90A AC OUTSolid Stat...
RELAY SSR 18A 240VAC AC OUT QCSolid Stat...