Allicdata Part #: | PS8101-ND |
Manufacturer Part#: |
PS8101-A |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | CEL |
Short Description: | OPTOISOLATOR 3.75KV TRANS 6SO |
More Detail: | Optoisolator Transistor Output 3750Vrms 1 Channel ... |
DataSheet: | PS8101-A Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Output Type: | Transistor |
Supplier Device Package: | 5-SOP |
Package / Case: | 6-SOIC (0.173", 4.40mm Width), 5 Leads |
Mounting Type: | Surface Mount |
Operating Temperature: | -55°C ~ 100°C |
Vce Saturation (Max): | -- |
Current - DC Forward (If) (Max): | 25mA |
Voltage - Forward (Vf) (Typ): | 1.7V |
Current - Output / Channel: | 8mA |
Voltage - Output (Max): | 35V |
Series: | NEPOC |
Input Type: | DC |
Rise / Fall Time (Typ): | -- |
Turn On / Turn Off Time (Typ): | 500ns, 600ns |
Current Transfer Ratio (Max): | 35% @ 16mA |
Current Transfer Ratio (Min): | 15% @ 16mA |
Voltage - Isolation: | 3750Vrms |
Number of Channels: | 1 |
Part Status: | Obsolete |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators are components that can be used to electrically isolate the input from the output of a device. The PS8101-A is a Transistor, Photovoltaic Output type of optoisolator and its working principle takes advantage of the fact that light can travel through an electrically insulating medium, such as air or glass. It is widely used in applications where isolation from high voltages is needed, such as electrical motors or similar high-voltage sources.
The PS8101-A has an LED and a phototransistor inside, both facing each other. When a current flows through the LED, light is produced. This light is then detected by the phototransistor, which is connected to the output terminals. The phototransistor works as a switch, allowing current to pass through or block it based on the amount of light received. This is what allows the PS8101-A to electrically isolate the input from the output, as there is no electrical connection between them.
The PS8101-A is primarily used in applications where isolation from high voltages or where signal noise is a problem. It is often used in motor control applications as it is able to provide high levels of insulation and prevent damage to the motor or the control board. It is also used in applications where a small amount of current needs to be isolated from the input, such as in digital circuits. In these cases, the output current is usually much lower than that of the input.
The PS8101-A is also used for signal conditioning applications, as it is able to reduce the noise levels generated by certain signals. This can be particularly beneficial in applications where the signal needs to remain clean and free from noise for optimum performance. This is especially useful in power supplies, as noise can cause instability and reduce the efficiency of the power supply.
The PS8101-A optoisolator is also widely used in Analog circuits. It is capable of providing high levels of insulation and can keep the signal from the input separate from the signal going to the output. This can be especially useful in cases where it is important that the input and output signals remain separate. It can also be used to provide additional isolation between input and output signals, allowing for more precise signal conversion.
Overall, the PS8101-A optoisolator can be a useful component in many different applications. It can provide isolation to protect circuits from overvoltage, keep signals from interfering with each other, and can also be used for signal conditioning. Its high insulation capabilities make it an ideal choice for motor control applications and in other applications where precise signal conversion is required. It is also widely used in analog circuits due to its ability to keep the input and output signals separate.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PS8101-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-F3-A | CEL | -- | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-K-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8103-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8103-F3-A | CEL | -- | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-F3-K-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-F3-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-F3-K-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-K-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-F3-K-AX | CEL | 0.61 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-F3-AX | CEL | -- | 22500 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-F3-AX | CEL | -- | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-F3-K-AX | CEL | 0.63 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-K-AX | CEL | 1.25 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-K-AX | CEL | 1.27 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-AX | CEL | 2.23 $ | 1749 | OPTOISOLATOR 3.75KV TRANS... |
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...