Allicdata Part #: | PS8101-K-AX-ND |
Manufacturer Part#: |
PS8101-K-AX |
Price: | $ 1.27 |
Product Category: | Isolators |
Manufacturer: | CEL |
Short Description: | OPTOISOLATOR 3.75KV TRANS 6SO |
More Detail: | Optoisolator Transistor Output 3750Vrms 1 Channel ... |
DataSheet: | PS8101-K-AX Datasheet/PDF |
Quantity: | 1000 |
140 +: | $ 1.15920 |
Output Type: | Transistor |
Supplier Device Package: | 5-SOP |
Package / Case: | 6-SOIC (0.173", 4.40mm Width), 5 Leads |
Mounting Type: | Surface Mount |
Operating Temperature: | -55°C ~ 100°C |
Vce Saturation (Max): | -- |
Current - DC Forward (If) (Max): | 25mA |
Voltage - Forward (Vf) (Typ): | 1.7V |
Current - Output / Channel: | 8mA |
Voltage - Output (Max): | 35V |
Series: | NEPOC |
Input Type: | DC |
Rise / Fall Time (Typ): | -- |
Turn On / Turn Off Time (Typ): | 500ns, 600ns |
Current Transfer Ratio (Max): | 35% @ 16mA |
Current Transfer Ratio (Min): | 20% @ 16mA |
Voltage - Isolation: | 3750Vrms |
Number of Channels: | 1 |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
PS8101-K-AX optoisolators are a type of transistor-photovoltaic output optoisolator that can be used in applications such as electrical isolation, noise suppression, and voltage level adjustment devices. These optoisolators can be used to provide electrical isolation between two circuits while still allowing the circuits to interact. This is achieved by using a combination of a photovoltaic output and a transistor switching element that allows electrical current to flow between the two circuits while isolating them electrically.
The PS8101-K-AX optoisolator works as follows. The photovoltaic output is used to detect an electrical signal on one side of the optoisolator. This signal is then amplified by the transistor switching element and outputted on the other side of the optoisolator. This effectively isolates two circuits while still allowing them to interact as dictated by the input signal.
One of the most common applications for PS8101-K-AX optoisolators is to provide electrical isolation between two circuits while still allowing them to interact. For example, a computer system may use optoisolators to isolate the main board and the video card from each other while still allowing the video card to send signals to the main board. This type of optoisolator is also used in automated industrial control systems to provide isolation between sensors and controllers while still allowing the controllers to respond to the inputs of the sensors.
One important feature of the PS8101-K-AX optoisolator is its ability to provide very high electrical isolation between two circuits, up to around 1500 volts. This is due to the use of the combined photovoltaic output and transistor switching element, which provide a very high degree of electrical isolation. This makes it ideal for use in applications where very high levels of electrical isolation are required.
The PS8101-K-AX optoisolator is also very reliable, with an average time before failure of up to 1.2 million hours. This makes it suitable for use in demanding environments, where reliability and performance are of paramount importance. The optoisolator is also easy to install, as it requires no external components for operation.
In conclusion, the PS8101-K-AX optoisolator is an ideal choice for applications that require a high level of electrical isolation, reliability, and ease of installation, such as automated industrial control systems and computer systems. This optoisolator uses a combination of a photovoltaic output and a transistor switching element to provide the electrical isolation while still allowing signals to pass between two circuits. This makes it uniquely suitable for a variety of applications where high levels of electrical isolation and reliable performance are essential.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PS8101-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-F3-A | CEL | -- | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-K-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8103-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8103-F3-A | CEL | -- | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-F3-K-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-F3-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-F3-K-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-K-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-F3-K-AX | CEL | 0.61 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-F3-AX | CEL | -- | 22500 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-F3-AX | CEL | -- | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-F3-K-AX | CEL | 0.63 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-K-AX | CEL | 1.25 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-K-AX | CEL | 1.27 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-AX | CEL | 2.23 $ | 1749 | OPTOISOLATOR 3.75KV TRANS... |
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...