Allicdata Part #: | PS8101-V-F3-K-AX-ND |
Manufacturer Part#: |
PS8101-V-F3-K-AX |
Price: | $ 0.63 |
Product Category: | Isolators |
Manufacturer: | CEL |
Short Description: | OPTOISOLATOR 3.75KV TRANS 6SO |
More Detail: | Optoisolator Transistor Output 3750Vrms 1 Channel ... |
DataSheet: | PS8101-V-F3-K-AX Datasheet/PDF |
Quantity: | 1000 |
2500 +: | $ 0.57330 |
Output Type: | Transistor |
Supplier Device Package: | 5-SOP |
Package / Case: | 6-SOIC (0.173", 4.40mm Width), 5 Leads |
Mounting Type: | Surface Mount |
Operating Temperature: | -55°C ~ 100°C |
Vce Saturation (Max): | -- |
Current - DC Forward (If) (Max): | 25mA |
Voltage - Forward (Vf) (Typ): | 1.7V |
Current - Output / Channel: | 8mA |
Voltage - Output (Max): | 35V |
Series: | NEPOC |
Input Type: | DC |
Rise / Fall Time (Typ): | -- |
Turn On / Turn Off Time (Typ): | 500ns, 600ns |
Current Transfer Ratio (Max): | 35% @ 16mA |
Current Transfer Ratio (Min): | 20% @ 16mA |
Voltage - Isolation: | 3750Vrms |
Number of Channels: | 1 |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The PS8101-V-F3-K-AX optoisolator is a divisive product that is classified into two subclasses; transistor, photovoltaic output. These optoisolators are widely used to isolate circuits and reduce the effect of any interference. The input and output of an optoisolator are not directly connected, which gives it the ability to perform this isolation between circuits. This article is focused on the application field and working principle of the PS8101-V-F3-K-AX.
Application Field
The PS8101-V-F3-K-AX optoisolator is ideal for applications with both high-voltage and high-current control, including communications and data communications systems. It also has a broad range of applications in the industrial industry, such as motor drives, metering, remote control, security systems, and automation systems. It is also used in many consumer electronics such as switch mode power supplies and interface ICs.
This optoisolator is also suitable for applications that require isolation between circuits. This is possible due to the relatively large safety voltage between input and output, which reduces the effect of interference. Additionally, the low-capacitance design ensures minimal signal distortion, which is important for applications like AC current measurement. The high internal voltage also makes the optoisolator suitable for use in potentially explosive environments.
Working Principle
The PS8101-V-F3-K-AX optoisolator works by using light as an electrical signal. When a voltage is applied to the base input, current will flow through the LED, causing the LED to emit a light. This light is directed to a phototransistor, which converts the light into a current. As a result, the output of the optoisolator is an electrical current that is proportional to the input voltage.
The PS8101-V-F3-K-AX optoisolator is also equipped with a short circuit protector and an over-voltage protection circuit. The short circuit protector is triggered when the output current exceeds the maximum allowable current, and the over-voltage protection circuit will activate when the output voltage exceeds the maximum allowable voltage. This helps protect the optoisolator from possible damage.
Conclusion
The PS8101-V-F3-K-AX optoisolator is a versatile device that can be used for a wide variety of applications, ranging from communications to industrial motor drives. Its low-capacitance design and high internal voltage make it suitable for applications that require isolation between circuits and are potentially exposed to interference. The short circuit and over-voltage protection also provide additional protection against damage.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PS8101-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-F3-A | CEL | -- | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-K-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8103-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8103-F3-A | CEL | -- | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-F3-K-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-F3-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-F3-K-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-K-A | CEL | 0.0 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-F3-K-AX | CEL | 0.61 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-F3-AX | CEL | -- | 22500 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-F3-AX | CEL | -- | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-F3-K-AX | CEL | 0.63 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-V-K-AX | CEL | 1.25 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-K-AX | CEL | 1.27 $ | 1000 | OPTOISOLATOR 3.75KV TRANS... |
PS8101-AX | CEL | 2.23 $ | 1749 | OPTOISOLATOR 3.75KV TRANS... |
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...