PT4855A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are systems used to transfer direct current from one set of supplies to another. They are used to increase or decrease voltage or provide isolation from other circuits. The PT4855A is one example of these converters and is commonly used as a step down converter for supplying low-voltage loads.

The PT4855A is a high-efficiency, low-noise buck converter designed to provide up to 7.5 Amps of output current from a single power source. The efficiency of these converters exceeds the standard provided by other traditional DC to DC converters. The device also features adjustable switching frequency, a soft start, current foldback, and integrated protection circuitry.

The primary application of the PT4855A is for supplying low-voltage loads from a higher voltage source. This usually occurs in situations where there is a significant difference between the input and output voltages. For example, a 12volt source may be used to reduce a 48volt input voltage to 5volts, allowing for the operation of lower voltage electronics, such as logic and other digital circuits. The PT4855A also provides isolation between the input and output through the use of its integrated transformer. This is important in situations where the system needs to be protected from other electrical or electrostatic interference, such as in industrial automation or in radio frequency applications.

The PT4855A operates on a simple buck converter topology. This means that it uses a switch (usually a transistor in this case) to control the flow of current between the input and output. The switch is switched on and off at a specific frequency to convert the voltage from the input to the output. This frequency is adjusted through the integrated frequency control. Further, the PT4855A also uses feedback to control the output voltage. The output voltage is monitored and compared to the desired setpoint. If there is a difference, then the switch is switched at different on and off times to adjust the output voltage accordingly.

The PT4855A also includes features such as soft start, current foldback, and over-voltage protection. The soft start feature reduces the inrush current caused by the initial startup and prevents damage to the output device from excessive current. The current foldback feature also prevents excessive current from damaging the output device by automatically reducing the output current when it surpasses the safe threshold. Finally, over-voltage protection ensures that the output voltage does not exceed the defined safe range.

The PT4855A is a highly efficient and reliable DC DC converter designed for the purpose of step down converting higher voltage sources to lower voltage sources. The device integrates features such as adjustable frequency, soft start, current foldback, and over-voltage protection to help protect the output device and provide the user with a reliable power solution. The converter utilizes a basic buck topology for an efficient transfer of current from the input to the output and is suitable for use in a variety of applications, including industrial automation and radio frequency applications.

The specific data is subject to PDF, and the above content is for reference