PT6302N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are power supply components used to transfer electrical energy from one DC voltage level to another with minimal power loss while providing precise control over the output voltage. The PT6302N is one such model and can be used to provide an isolated output to allow long cable runs, apply filters, or provide direct power to multiple isolated loads in sensitive electronics applications. PT6302N module is widely used in devices such as computer peripherals, chargers, automotive systems and medical devices.

The PT6302N module is a two-channel, synchronous buck regulator with a high efficiency of up to 94%. It integrates high-side and low-side MOSFETs, a high-accuracy current limiting circuit, soft-start circuit, and output overvoltage protection circuit. It is a 75mΩ/45mΩ power stage module, which can reduce quiescent current by up to 90%. The primary input voltage range is from 4.5V to 24V and the output voltage range is from 0.8V to 22V. The maximum output power is 30W, and the output current is up to 2A.

In addition, the output voltage ripple of the module is minimized because of the synchronous buck architecture, which reduces the size of the filter inductors. The PT6302N also has a comprehensive suite of integrated protection features which include over voltage, under voltage, over temperature, internal current limit, external current limit, and low load shutdown. This comprehensive protection design can avoid the damage of the module in case of abnormal working conditions.

The working principle of the PT6302N is based on a synchronous buck converter, which is a type of switch mode power supply (SMPS) that uses switching devices to convert a voltage from one level to another. In this type of converter, an input voltage is regulated by switching between two voltage sources – a higher voltage or higher power source, and a lower voltage or lower power source. The regulator consists of a power source, such as a battery, some sort of power switching device, typically a MOSFET, a diode, and an inductor. The power switching device is used to control the conversion of energy from the higher voltage source to the lower voltage source by turning the switch on or off.

When the switch is turned on, current is allowed to flow from the higher voltage source to the lower voltage source, via the inductor. This current increases linearly, and as the current increases, magnetic flux is produced in the inductor. When the switch is turned off, the magnetic flux stored in the inductor keeps the current flowing to the lower voltage source. The voltage on the lower voltage source is then regulated by controlling the switching frequency of the power switching device.

The PT6302N also has a built-in logic which helps to control the switching frequency and output voltage. It has pulse-width modulation (PWM) control with a precision of 0.5%, and over voltage protection (OVP) with a precision of 2%. Moreover, it has a fast transient response time of up to 10μs. This helps the module maintain accurate control of the output voltage over a wide input voltage range, even in environments with extremely high levels of electromagnetic interference (EMI).

In conclusion, the PT6302N is an effective and efficient power supply module for transferring energy from one DC voltage level to another with minimal power loss. It has all the protection features needed to ensure reliable operation and high accuracy output voltage regulation even in noisy environments. The module’s high efficiency, comprehensive suite of protection features and accurate output regulation make it suitable for a wide variety of electronics applications, including computer peripherals, chargers, automotive systems and medical devices.

The specific data is subject to PDF, and the above content is for reference