PVN013

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays

Solid state relays (SSRs) are an important type of switching devices in many industrial and electrical applications. They are specifically designed to replace electromechanical relays due to their fast response, low power consumption, and reliability. They are also capable of switching AC loads at high switching frequencies with very little energy loss. In this article, we’ll look at the application field and working principle of the PVN013 solid state relay.

The PVN013 solid state relay is a three-terminal single-pole single-throw (SPST) device that consists of a static input section, a static control section, and an output section. The static input section is connected to an AC or DC source and is responsible for supplying power to the relay. The static control section is connected to a control element such as a transistor or thyristor and is responsible for controlling the output section. The output section is connected to the load and is responsible for switching the load on or off.

The input and output sections of the PVN013 solid state relay are connected using two insulated gate field-effect transistors (IGFETs). These IGFETs work together to form a bidirectional switch that is capable of switching AC loads at high switching frequencies. The relay is designed to have a low output loss, making it ideal for switching applications where low power consumption is critical.

The PVN013 solid state relay is designed to be used in any industrial application where an electromechanical relay may be used. Examples of these applications include motor control, process control, and power supply control. The PVN013 is also ideal for use in solar cell and photovoltaic applications, making it an effective and efficient alternative to mechanical relays. Additionally, the PVN013 can be used as an interface between a computer and an isolated digital input.

The PVN013 solid state relay is a multifunctional device. It can be used for switching AC and DC loads, in addition to providing isolation and EMC performance. The relay can switch AC or DC loads with a high switching frequency of up to 1 MHz and a low voltage drop of less than 5 volts. Additionally, the relay has a high maximum switching capacity of 10A AC and 6A DC.

The working principle of the PVN013 solid state relay is based on the principle of charge transfer. The input section of the relay is responsible for supplying power to the control section. When the control section is triggered, it sends a signal to the output section, which in turn, is responsible for controlling the load. The output section is connected to either an AC or DC load, depending on the application, and is switched on or off when a trigger is received.

To summarize, the PVN013 solid state relay is a reliable and efficient switching device that can be used in a variety of industrial and electrical applications. It is capable of switching AC and DC loads with high switching frequencies and low power consumption. Additionally, the relay has a high maximum switching capacity of 10A AC and 6A DC, making it an ideal choice for applications where power is critical.

The specific data is subject to PDF, and the above content is for reference