PVN013S-TPBF

Series:	PVN, HEXFET®
Packaging:	Tape & Reel (TR)
Part Status:	Active
Mounting Type:	Surface Mount
Circuit:	SPST-NO (1 Form A)
Output Type:	AC, DC
Voltage - Input:	1.2VDC
Voltage - Load:	0V ~ 20V
Load Current:	2.5A
On-State Resistance (Max):	100 mOhms
Termination Style:	Gull Wing
Package / Case:	6-SMD (0.300", 7.62mm)
Supplier Device Package:	6-SMT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to PVN013S-TPBFThe PVN013S-TPBF is a solid state relay (SSR), a device which can be used to control the on/off state of an electrical circuit with a digital signal. It is a single-pole/double-throw (SPDT) type of SSR, designed to switch high-power loads up to 500V/8 Amp with a maximum load drop of 1.5V at 2A. It has a low control current of 5mA and a low-power consumption of 0.6W. The PVN013S-TPBF also offers temperature sensing capabilities which enable it to adjust the on/off times of the SSR for more precise energy savings.Application field and Working PrincipleThe PVN013S-TPBF is mainly used in industrial applications such as motor control, temperature control, or even in medical equipments. It can be used to switch high power electrical appliances, such as motors, pumps, solenoids, valves, and other equipment. The SSR is optimized to work with high voltage/current combinations with low power dissipation and switching speed. The PVN013S-TPBF functions by allowing a digital signal to control the on/off state of the SSR. This signal is provided by a controller, such as an Arduino or Raspberry Pi, which are connected to the PVN013S-TPBF. Then when the digital signal is given, the SSR switches from open to close, or close to open, depending on the signal given. This process is achieved using a MOSFET, which is a type of transistor that can provide the necessary switching powers. The SSR is designed to work with high currents, so it needs to be properly heat sinked to ensure its proper functioning. This is necessary because the MOSFETs generate heat when the current is flowing, so a proper heat sink is needed to dissipate that heat. For this purpose, the PVN013S-TPBF comes with its own heat sink made of a copper finned base.Advantages and DrawbacksThe main advantages of the PVN013S-TPBF include its low power consumption and its low control current, which make it ideal for applications where low voltage is required. It also offers temperature sensing capabilities, which means that the SSR can adjust the on/off times of the relay for more precise energy savings. Additionally, the SSR is designed to work with high currents and it comes with its own heat sink, which helps to dissipate the heat generated by the MOSFETs.However, the main drawbacks of the PVN013S-TPBF are its high cost and the fact that it is not suitable for applications which require low switching speeds. Since the SSR is designed to be used with high currents, it is not suitable for applications which require rapid switching. Additionally, the cost of the SSR can be prohibitive for some applications.ConclusionThe PVN013S-TPBF is a solid state relay specially designed to switch high-power loads up to 500V/8 Amp with a maximum load drop of 1.5V at 2A. It has a low control current of 5mA and a low-power consumption of 0.6W and is optimized to work with high voltage/current combinations with low power dissipation and switching speed. Additionally, the SSR offers temperature sensing capabilities, which can allow for more precise energy savings. While the PVN013S-TPBF comes with many advantages, such as its low power consumption and its temperature sensing capabilities, its high cost and its inability to be used with rapid switching applications are drawbacks which must be taken into consideration before choosing the SSR for an application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description