Allicdata Part #: | PWA01CM485A-ND |
Manufacturer Part#: |
PWA01CM485A |
Price: | $ 0.00 |
Product Category: | Industrial Controls |
Manufacturer: | Carlo Gavazzi Inc. |
Short Description: | 240VAC 3PH LOAD GUARD RELAY |
More Detail: | N/A |
DataSheet: | PWA01CM485A Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | PWA01 |
Part Status: | Active |
Type: | Current Sensing AC, Voltage Sensing AC |
Trip Status: | Energized High/Low |
Trip Range: | 380 ~ 480V AC |
Delay Time: | Fixed, 1 Sec, 2 Sec, 6 Sec |
Voltage - Supply: | 380 ~ 480VAC |
Output Type: | Relay |
Circuit: | SPDT (1 Form C) |
Contact Rating @ Voltage: | 8A @ 250VAC |
Mounting Type: | Socketable |
Operating Temperature: | -20°C ~ 60°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The PWA01CM485A is a special type of monitoring device from the current/voltage/relay output series. It is widely used in the monitoring of industrial output control, such as production line, temperature control, and HVAC systems.
The device has various input and output functions. It is equipped with 4 individual opto-isolated inputs, each of which is capable of detecting 0-10V input voltage. It also has 4 optically-isolated solid-state relay outputs, each of which can be set between 0 and 10V. Furthermore, the device also features 4 connectors for 24Vdc input/output power supply and 4 opto-isolated analog outputs, each of which is capable of providing current proportional to the 10V input.
The device\'s working principle is based on the principle of closed loop feedback. A 10V input is detected by each of the 4 individual opto-isolated inputs. The input signals are then sent to the solid-state relay outputs, which generate a proportional output current. The current is then sent back to the opto-isolated analog output, where it is monitored for voltage and/or current. If the current drops below a pre-determined limit, the solid-state relay output will activate and the relay output will switch off.
The PWA01CM485A has a wide range of applications. It can be used to monitor and control industrial equipment, such as robots, automated assembly systems, and HVAC systems. It can also be used to control temperature and other environmental parameters in industrial production lines and work areas. Moreover, it is suitable for monitoring system health and performance in industries such as telecommunications, manufacturing, and other critical applications.
In addition, the device is designed to provide a low-cost, reliable, and efficient solution for industrial applications. It is highly reliable, with a guaranteed operating lifetime of 1000 hours and the option of extended warranty coverage. Furthermore, it is very easy to install and set up, as well as to use and maintain. It is ideal for applications where accuracy and an efficient response time are essential.
The PWA01CM485A is a reliable and user-friendly device that can be used to monitor and control industrial output control, such as production line, temperature control, and HVAC systems. It has various input and output functions, including optothermal-isolated inputs, solid-state relay outputs, 24Vdc input/output power supply, and optothermal-isolated analog outputs. Its working principle is based on the principle of closed loop feedback and it is suitable for a wide range of applications. In addition, it is cost-effective, highly reliable, and easy to install and set up.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PWA01CM485A | Carlo Gavazz... | 0.0 $ | 1000 | 240VAC 3PH LOAD GUARD REL... |
CURRENT SWITCH 5-50A
21-890=WILMAR POWER MONITOR
RELAY CUR SENSE 24VDC 5-5A
REL AC GROUND FAULT SENS 120VAC
3-PHASE OVER/UNDER VOLT RLY
TACH RLY 300 RPM 115V