PX2ES2XX500PSCHX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure sensors, transducers, and transmitters are used for a variety of application scenarios. The PX2ES2XX500PSCHX is one such device, which, when properly connected and calibrated, can provide reliable, accurate measurements in a variety of environments. Here, we\'ll discuss how this pressure sensor works, what applications it is suitable for, and how to make sure it is providing accurate readings.

The PX2ES2XX500PSCHX pressure sensor has a ceramic capacitive sensing element, which is enclosed within a stainless steel housing. This housing is manufactured from high-grade stainless steel, allowing it to withstand the pressures it is designed to measure. When a pressure is applied to the sensor through a port or a tube, the ceramic element is compressed to a certain extent, causing a change in capacitance. This change in capacitance is measured by the onboard electronics, and is then converted to an electrical signal, which is proportional to the applied pressure.

Due to its reliable and accurate measurements, the PX2ES2XX500PSCHX is suitable for a wide variety of applications, such as hydraulic, pneumatic, fuel, and oil pressure systems. It is also used in HVAC systems, water/waste water systems, test rigs, and pressure/vacuum chambers. This pressure sensor can measure a range of pressures from -100 mbar to +10000 mbar, with the resolution depending on the range chosen.

This pressure sensor is fully programmable and can be configured to provide readings in various units, such as Pa, bar, and mm H2O. The sensor also has a number of output options, including 4-20mA, 0-10V, and RS485, among others. It is also available in a variety of housing materials, depending on the application, with the most common being stainless steel and aluminum.

Calibrating the PX2ES2XX500PSCHX pressure sensor is straightforward and should be done whenever the sensor is installed, or when it is moved to a new location. First, the sensor needs to be connected to the power supply and the reference pressure needs to be applied. Second, the zero point needs to be set, by providing a reference pressure of zero. This should be done by connecting the reference port to a pressure source of zero, or by using a zero pressure sensor. Finally, the full-scale setting should be adjusted using a pressure source with a known pressure.

In conclusion, the PX2ES2XX500PSCHX pressure sensor is a reliable and accurate device, suitable for a wide range of applications. It has a ceramic capacitive element, enclosed in a high grade stainless steel housing, capable of measuring a range of pressures from -100 mbar to +10000 mbar. Furthermore, it is fully programmable, with various output options and a number of housing materials. Finally, the sensor should be calibrated whenever it is installed or moved to a new location.

The specific data is subject to PDF, and the above content is for reference