Q2006LH4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The Q2006LH4 is a type of TRIAC commonly found in consumer electronics devices. It is a three-terminal, four-layer semiconductor device used to control current flow between two independent circuits. It has two main terminals called the main terminal and the auxiliary terminal. The Q2006LH4 is most commonly used in DC to AC applications, such as motor and light dimming, switching and low-voltage power control.

The Q2006LH4 is a three-terminal device consisting of two main terminals, a main terminal and an auxiliary terminal, and a gate terminal. The main terminals are the two electrodes responsible for controlling current flow in a circuit, whereas the gate terminal is connected to the main terminals to control current flow. When a small voltage is applied to the gate terminal, the Q2006LH4 TRIAC turns on and current flow is allowed to pass through the two main terminals. When the voltage is removed from the gate terminal, the TRIAC turns off and current flow is stopped.

The Q2006LH4 has a wide range of applications in consumer electronic devices. It is commonly used as a medium-power switch, such as in light dimmers, motor speed controllers, and other low-voltage control circuits. The TRIACs can also be used in AC power control circuits, such as motor and appliance speed controls, phase-angle dimmers, and switching regulators. Additionally, the Q2006LH4 is often used as an interrupter and timer circuit to control the on and off times of an AC circuit.

The Q2006LH4\'s working principle is based on the TRIAC\'s ability to control current flow in both directions. This is achieved by using a device known as a thyristor. A thyristor is a three-terminal, four-layer semiconductor device that allows current flow in one direction, but not the other. The TRIAC relies on the use of two thyristors connected in series to control current flow in both directions, as well as the application of a small voltage to the gate terminal to control the overall current flow. The thyristors are connected so that one is used to allow current flow in the forward direction, while the other is used to allow current flow in the reverse direction.

The Q2006LH4 is a versatile analog semiconductor device suitable for use in a wide range of applications. Its three-terminal, four-layer construction and ability to control current flow in both directions makes it a useful tool for controlling electrical devices in consumer electronic applications. Its low power consumption and flexible control of current make it suitable for a wide range of applications, from motor and light dimming, to switching and low-voltage power control.

The specific data is subject to PDF, and the above content is for reference