Q6030LH3TP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are solid state semiconductor devices invented and perfected over the years to enable long lasting electronic switches, various forms of regenerative feedback controlling circuits and specific types of amplifiers. A Triac is a three-terminal ac switch made up of two Thyristors connected back-to-back. The Q6030LH3TP is a 30A, 600V, 75mΩ logic level Triac designed for medium power AC switch in the range of 100KHz control frequency. It is primarily used in on/off switching and phase control applications.

Applications

The Q6030LH3TP Triac is used in a wide range of applications, from controlling motor speed and heating elements in appliances such as boilers and air conditioners, to street lighting and industrial environment. It can also be used in various electronic circuits, like power regulators, dimmers, timers and servo controllers. In addition to its high power handling capabilities, the Q6030LH3TP provides high noise immunity, high EMI characteristics and a low turn-on voltage.

Working Principle

The Q6030LH3TP Triac is a three-terminal semiconductor device which switches ON and OFF under the control of a positive gate current. The key principles governing its operation are the current and voltage ratings. When the current in the main terminal (MT1) and the main terminal (MT2) exceed the current and voltage ratings, the Q6030LH3TP Triac will switch ON. Gate current is typically applied to MT2 to cause the switch to turn ON. To turn OFF the switch, the gate current is removed, and the current in either the main terminal (MT1) or the main terminal (MT2) must fall below the current and voltage ratings.

The Q6030LH3TP Triac is a sensitive device and, in order to function properly, must be handled with extreme care. The appropriate gate current must be used in order to prevent excessive heat dissipation and damage to the device. The gate current should never exceed the maximum rating of 5mA

The Q6030LH3TP Triac is also used in a synchronous phase control application, which is commonly used in speed control systems. In synchronous phase control: the Triac is switched ON when the ac voltage through the main terminal (MT1) and the main terminal (MT2) is in phase with the gate voltage; and the Triac is switched OFF when the ac voltage through the main terminal (MT1) and the main terminal (MT2) is not in phase with the gate voltage.

At low frequencies (such as in a dimmer circuit), the Q6030LH3TP Triac can also be used in an asynchronous phase control application. In this application, the Triac is switched ON when the voltage through the main terminal (MT1) and the main terminal (MT2) is greater than the voltage applied to the gate; and the Triac is switched OFF when the voltage through the main terminal (MT1) and the main terminal (MT2) is less than the voltage applied to the gate.

Conclusion

The Q6030LH3TP Triac is a powerful switch that can be used in a variety of applications. It is well suited for motor speed control, heating element control, dimming applications and timer circuits. It is also an ideal device for synchronous and asynchronous phase control applications. Care should be taken to ensure that it is used correctly and with appropriate gate currents to prevent damage to the device.

The specific data is subject to PDF, and the above content is for reference