Q6035P5

Series:	--
Packaging:	Bulk
Part Status:	Obsolete
Triac Type:	Standard
Voltage - Off State:	600V
Current - On State (It (RMS)) (Max):	35A
Voltage - Gate Trigger (Vgt) (Max):	2.75V
Current - Non Rep. Surge 50, 60Hz (Itsm):	300A, 350A
Current - Gate Trigger (Igt) (Max):	50mA
Current - Hold (Ih) (Max):	50mA
Configuration:	Single
Operating Temperature:	-25°C ~ 125°C (TJ)
Mounting Type:	Chassis Mount
Package / Case:	Fastpak, TO-3 Base
Supplier Device Package:	TO-3/TO-239 (Fastpak)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs

A TRIAC (Triode for Alternating Current) is a three terminal electronic component, commonly referred to as an electronic switch. It is an alternating current (AC) version of the SCR (Silicon Controlled Rectifier). TRIACs are widely used in many areas, including industrial and home controls, robotics, and medical equipment. The Q6035P5 TRIAC is a family of 25 Amp, 600 Volt rated TRIACs. It is intended for general purpose AC control applications where a medium power level is required. The construction of a TRIAC is similar to that of an SCR – a solid-state gate triggered device. A TRIAC has two gates instead of one - one for current flowing in each direction of the alternating AC current. This allows the TRIAC to be triggered into conduction in either direction without the current needing to be reversed by a mechanical switch.The Q6035P5 TRIACs have an on-state current of 25A and a peak off-state current of 250A. This current rating is suitable for most medium level AC switching applications, such as control of AC loads in power supplies, motor control, lighting and heating controls, and even audio amplifiers. The triggering of the Q6035P5 TRIAC is done with a fast rise time, low amplitude current applied to the gate terminal. In this way, small signals can be used to turn on and off large amount of AC power. The Q6035P5 TRIAC works on the principle of the avalanche breakdown of a unidirectional current flow. When a small current through the gate is applied to the device, it turns on the TRIAC and allows conduction of current in both directions. The effect is such that the two halves of the TRIAC act as two independent switches, with the bottom half triggered on when current flows in a forward direction, and the top half triggered on when current flows in a backward direction. The Q6035P5 TRIAC offers a variety of features to provide reliable and dependable over voltage, over current and over temperature protection, which makes it the ideal choice for many applications. It is also RoHS compliant and meets safety requirements such as UL and cUL. In summary, the Q6035P5 TRIAC is an ideal choice for medium AC control applications that require electrical isolation, as well as robustness and reliability. It is suitable for use in a variety of applications, including medical equipment, lighting and heating controls, power supplies, motor control and audio amplifiers.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description