R5F51306BDFL#30

Program Memory Size:	256KB (256K x 8)
Supplier Device Package:	48-LFQFP (7x7)
Package / Case:	48-LQFP
Operating Temperature:	-40°C ~ 85°C (TA)
Oscillator Type:	Internal
Data Converters:	A/D 10x12b
Voltage - Supply (Vcc/Vdd):	1.8 V ~ 5.5 V
RAM Size:	32K x 8
EEPROM Size:	8K x 8
Program Memory Type:	FLASH
Series:	RX100
Number of I/O:	38
Peripherals:	DMA, LVD, POR, PWM, WDT
Connectivity:	I²C, LINbus, SCI, SPI
Speed:	32MHz
Core Size:	32-Bit
Core Processor:	RX
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The Renesas R5F51306BDFL#30 is a low power, high performance 32-bit microcontroller designed for use in embedded applications. It is optimized for the automotive market, but it can also be used in other applications such as industrial, consumer and medical. This article will discuss the applications and the working principles of the R5F51306BDFL#30.

Architecture

At the core of the R5F51306BDFL#30 is the 32-bit 8-stage superscalar RISC core processor that offers a powerful instruction set and fast execution. The processor can handle up to 616 MIPS at 24MHz and can process 32-bit and 16-bit instructions. It also has a built-in data cache, instruction cache and memory protection unit.The chip also features a variety of peripherals, such as an Advanced Encryption Standard (AES) encryption engine which can help secure data, transport and communication; multiple serial communication interfaces (SCI, UART and SPI); a Direct Memory Access (DMA) controller; and a Pulse Width Modulation (PWM) timer and counter.

Power Saving Features

The R5F51306BDFL#30 has a number of power saving features, such as: Dynamic Voltage and Frequency Scaling, Extended Sleep Mode, 4-level power saving mode, and Adaptive ON/OFF control. The Dynamic Voltage and Frequency Scaling adjusts the processor’s clock speed and core voltage depending on the current operating conditions and workload. The Extended Sleep Mode allows the microcontroller to enter into a low-power state when it is not in use. The 4-level power saving mode allows the system to adjust the CPU core frequency and voltage depending on the current workload. Finally, the Adaptive ON/OFF control enables the system to power down parts of the microcontroller when they are not in use.

Applications

The R5F51306B has been designed to be used in a variety of embedded applications, such as automotive and industrial systems. The automotive sector can benefit from its performance, low power consumption and sophisticated encryption capabilities for secure communication. In the industrial sector it can be used for motion control systems, robotics, HMI and IoT systems.In addition, the luxurious combination of on-chip peripheral functions provides the flexibility and robustness needed for complex tasks in consumer, medical and other embedded applications.

Working Principle

The R5F51306BDFL#30 operates on an 8-stage pipeline, starting with instruction fetch and decoding, followed by register transfer, priority-based execution and memory access. The processor can fetch one instruction per cycle, and multiple instructions can be pipelined, helping to improve performance. Each instruction follows the Multiple-Data-Cache-Access (MDCA) model, where data is loaded from the main memory, cached and then operated, reducing overall system latency.The processor also features direct memory access (DMA) which is used to transfer data between memory regions and peripherals. This helps to reduce the system’s CPU utilization. The Pulse Width Modulation timer and counter allow PWM signals to be generated and used for motor control and other applications.

Conclusion

The R5F51306BDFL#30 is a 32-bit microcontroller that offers powerful performance, low energy consumption and a variety of on-chip peripherals for various applications. It has a sophisticated instruction set and power saving features that make it ideal for automotive, industrial and consumer use. Its DMA and Pulse Width Modulation timer and counter add additional flexibility for specialized operations.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description