R60030-1COR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuseholders

Fuseholders are devices or special outlets which protect electric circuits from over current. They can be used to protect circuits against overload or over current or for system disconnection. The reliability and long use life of a fuseholder depends on its construction and materials. Fuseholders are typically made of a dielectric plastic or ceramic. Fuseholders are available in a variety of shapes and sizes, as well as many mounting styles.

One such fuseholder type is the R60030-1COR. This type of fuseholder can be used for 5 to 30 Ampere circuits. It is an enclosed pole fuseholder for standard class R fuses. Made from impact-resistant thermoplastic, this fuseholder has a single pole terminal with a positive-locking approach. The trip flag feature is a safety device which aids in the visual inspection of the fuse. This type of fuseholder is suitable for equipment operating at voltage not exceeding 600V and for a maximum instantaneous current of 30A.

The R60030-1COR fuseholder also has an IP54 degree of protection, meaning it is dust protected and splash proof. This is important when needing to isolate a circuit from environmental and electrical hazards. The high temperature rating of these fuseholders make them suitable for many applications.

The working principle of the R60030-1COR fuseholder is simple. It protects an electric circuit from overcurrent by bringing the current rating of a circuit to a safe level. The fuse is normally disconnected from the circuit, so when an excess current passes, it causes the fuse to heat up. The heat melts the fuse and it breaks the circuit, cutting off the excess current.

The R60030-1COR fuseholder has a wide range of applications. It can be used in motor control, circuit protection, and in any equipment requiring a large current, such as air conditioning, consumer electronics, and power supplies. It is also suitable for equipment operating at voltages not exceeding 600V, with a maximum instantaneous current of 30A.

In conclusion, the R60030-1COR fuseholder is a reliable device used for protecting a circuit against overload and over current. It is suitable for many types of applications, is easy to maintain, and has a high temperature rating for safety. It can protect a circuit from excess current and bring its current rating to a safe level.

The specific data is subject to PDF, and the above content is for reference