RC1180-MBUS3-DK

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The RC1180-MBUS3-DK is a multi-modal evaluation and development kit that is designed for evaluating and optimizing the range, the data rate, and the power output of the RC1180-MBUS3. It is part of the RF Evaluation and Development Kits, Boards, and offers extensive possibilities for analyzing, testing, and calibrating 2-way communication between any two RC1180-MBUS3 devices. It is also useful in evaluating solutions for distance optimization with arbitrary packet size and data rate as well as analyzing problematic cases where the received signal is significantly weaker than the required sensitivity.

The RC1180-MBUS3-DK supports three different communication modes: one-way, two-way, and three-way communication. In one-way communication, the signal is sent from the transmitter and it is not expected to return via the receiver. This allows for analyzing the power needed from the transmitter in order to reach the desired receivers in a real-life scenario. On the other hand, two-way communication requires both transmitter and receiver to be able to send and receive signals. This allows for basic range and sensitivity measurements to be taken. Lastly, three-way communication adds a third device to the equation, which allows for transceivers to be tested and calibrated, further increasing the accuracy of the results.

The RC1180-MBUS3-DK also includes an external antenna that allows the connected devices to be tested at different locations. By changing the antenna’s position and orientation, various reflections, diffractions, and refractions of the signal can be examined. Additionally, an amplifier can be connected to the external antenna to increase the signal-to-noise ratio of the transmitted signal. This allows for testing of both far and near field applications, as well as eliminating any possible interference in the signal path.

The RC1180-MBUS3-DK also comes with a graphical user interface (GUI) that allows users to easily configure the kit and enable different functionality. The GUI also displays power output graphs and histograms that can be used to observe the performance of the transmission. Other features of the kit include a packet error ratio calculator, sweep generator, and modulation loop tester. All of these features enable the user to test and calibrate their setup.

In conclusion, the RC1180-MBUS3-DK is a multi-modal evaluation and development kit that is designed for evaluating and optimizing the range, the data rate, and the power output of the RC1180-MBUS3. It is part of the RF Evaluation and Development Kits, Boards, and offers extensive possibilities for analyzing, testing, and calibrating 2-way communication between any two RC1180-MBUS3 devices. It is also useful in evaluating solutions for distance optimization with arbitrary packet size and data rate as well as analyzing problematic cases where the received signal is significantly weaker than the required sensitivity.

The specific data is subject to PDF, and the above content is for reference