RF064PJ752CS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays are important components of electronic systems. RF064PJ752CS, a special type of resistor network, is widely used in today\'s electronic and electrical applications.

RF064PJ752CS is an array of eight sealed silicon flat-array resistors designed in a 4-by-2 configuration. Its maximum power rating is 1W. Each element of the resistors is measured using a voltage divider and the total resistance is 50 ohms with respect to ground. The array is divided into four terminal pairs of two interconnected resistors. The resistors can be used either in series or in parallel to form many different resistor network configurations. For example, two of the resistors could be connected in series while the other two are connected in parallel. This gives a total resistance of 20 ohms with respect to ground.

RF064PJ752CS can be found in many electronic systems such as radio transmitters and receivers, amplifiers, oscillators, and digital circuits. In these applications, the resistors usually provide the necessary resistance to create a voltage divider circuit. This is done by making two equal resistors to provide symmetric voltage dividers for both positive and negative voltages. For example, in a radio transmitter, radio frequency signals are divided in one of the two channels. By connecting the other two resistors in series with the positive side of the radio frequency signal, the negative side of the signal is divided equally between the two resistors. This allows RF064PJ752CS to be used as an adjustable gain resistor.

In addition, RF064PJ752CS can also be used in frequency-selective circuits. These circuits are used to screen out unwanted signals by controlling the amount of current that flows through them. By wiring the resistors in a 4-by-2 configuration, the network can be used as an adjustable low-pass filter. The network is used to filter out higher frequencies while allowing lower frequencies to pass through. By adjusting the resistance of the resistors, the cutoff frequency can be changed and the filter can be adjusted accordingly.

RF064PJ752CS is also used in impedance matching circuits. This type of circuit is designed to match the impedance of two components in a circuit. This can be done by connecting the two components to the resistors in the network. By adjusting the resistance of the resistors, the impedance of the two components can be matched. This is important for ensuring that the signal is transmitted correctly and without loss.

In summary, RF064PJ752CS is a highly versatile resistor network that can be used in many different electronic systems. Its unique 4-by-2 configuration allows it to be used as an adjustable gain resistor, low-pass filter, or impedance matching circuit. It is an essential element in many electrical and electronic applications and provides a great level of flexibility and performance.

The specific data is subject to PDF, and the above content is for reference