RF2320TR7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF amplifiers are essential electronic components for wireless system designs. The RF2320TR7 device is a low noise amplifier (LNA) specifically designed to operate within the frequency range of 2450-2690MHz. It is a full-featured amplifier with an integrated low noise amplifier, two gain stages, and single-ended input and output. The RF2320TR7 amplifier is used in a wide variety of applications ranging from wireless point-to-point communication to consumer-based Wi-Fi systems.

The RF2320TR7 has an impressive gain of 24dB, a noise figure of 1.4dB at 2450MHz and 35.5dBm of output power. The input and output impedance is also 50 ohms and the device draws a maximum current of 70mA. The low noise figure and high gain makes the RF2320TR7 an ideal solution for a variety of applications such as mobile hotspots, short range point to point communications, Wi-Fi, and Bluetooth systems. The device is also well suited for use in digital video system designs.

The RF2320TR7 is made up of two cascaded stages of amplifiers connected in series. The first stage is a low noise amplifier with a current gain of 24dB and a noise figure of 1.4dB. This low noise amplifier provides a gain of 24dB and reduces the signal to noise ratio of the input signal. The second amplifier is a single-ended amplifier with a gain of 18dB. This second amplifier provides the additional gain required for the applications listed above. The combination of the two amplifiers provides a total gain of 42dB.

The RF2320TR7 also has two control pins. The first pin, titled Gain Control, is used to adjust the gain of the amplifier and the second pin, titled Input Control, is used to adjust the input impedance of the amplifier. The gain control pin is used to set the output power level while the input control pin is used to tune the amplifier for optimal gain. The amplifier also features reverse polarity protection and can operate at voltages up to +12V.

The RF2320TR7 amplifier has a wide range of application areas. It is widely used in the mobile wireless industry for creating hotspots and establishing short range point to point connections. It can be used in LCD and LED displays for providing clean amplified signals for these applications. The device can also be used in Wi-Fi and Bluetooth systems for boosting the signal strength and providing superior up/down link performance.

The RF2320TR7 is an ideal solution for applications where high gain, low noise performance and small physical size are desired. Its combination of features and performance make it well suited for a wide variety of applications. Its low power consumption and wide operating temperature range make it an excellent choice for wireless system designs.

The specific data is subject to PDF, and the above content is for reference