Allicdata Part #: | RF9830A-ND |
Manufacturer Part#: |
RF9830A |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | RFMD |
Short Description: | IC MMIC POWER AMP |
More Detail: | RF Amplifier IC |
DataSheet: | RF9830A Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | * |
Part Status: | Obsolete |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF amplifiers are electronic amplifiers used to increase the amplitude of the signal. RF amplifiers typically act on high-frequency signals, and their design, architecture, and utility vary greatly. The RF9830A is an example of such an amplifier.
The RF9830A is a low-noise, high-power amplifier featuring high gain and wide bandwidth. It is well suited to a variety of applications, including any general-purpose RF amplifier applications. It is a good choice for applications such as wireless base stations, two-way radio repeaters, and wireless LANs.
The RF9830A is composed of two parts: the main biasing network and the PLL circuit. The biasing network is a combination of capacitors, resistors, and inductors, and it acts as a low-pass filter that protects the amplifier from high- frequency instabilities and interference. The PLL circuit, on the other hand, is an integrated circuit that provides the appropriate gain settings for the amplifier.
In terms of its working principle, the RF9830A amplifies a signal by increasing its voltage, current, or both. It typically performs this process with some slight changes to the phase or amplitude of the signal. Moreover, the amplifier also acts as a filter, filtering out any undesired noise or signals. This process is achieved by using the biasing network mentioned above, which allows the amplifier to respond to certain frequencies while rejecting others.
In summary, the RF9830A amplifier is a low-noise,high-power amplifier. It is composed of both a biasing network and a PLL circuit, and its main purpose is to amplify signals while filtering out any undesired noise or signals. It is well-suited for a variety of applications, such as wireless base stations, two-way radio repeaters, and wireless LANs.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
RF9818 | RFMD | 0.0 $ | 1000 | IC DRIVER AMPRF Amplifier... |
RF9812B | RFMD | 2.63 $ | 1000 | IC AMPRF Amplifier IC GSM... |
RF9831A | RFMD | 2.43 $ | 1000 | IC AMPRF Amplifier IC |
RF9830 | RFMD | -- | 1000 | IC AMPRF Amplifier IC GSM... |
RF9820 | RFMD | 0.0 $ | 1000 | IC RF MODULE FRONT ENDRF ... |
RF9830A | RFMD | 0.0 $ | 1000 | IC MMIC POWER AMPRF Ampli... |
RF9808 | RFMD | 0.0 $ | 1000 | IC MODULE FRONT END 16QFN... |
RF9810 | RFMD | -- | 1000 | MODULE TRANSMITRF IC Tran... |
RF9812 | RFMD | 0.0 $ | 1000 | MODULE TRANSMITRF IC Tran... |
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...