Allicdata Part #: | RFDA4005-ND |
Manufacturer Part#: |
RFDA4005 |
Price: | $ 2.03 |
Product Category: | RF/IF and RFID |
Manufacturer: | RFMD |
Short Description: | RF AMP 50-4000MHZ 32QFN |
More Detail: | RF Amplifier IC LTE, WiMax 50MHz ~ 4GHz 32-MCM (5.... |
DataSheet: | RFDA4005 Datasheet/PDF |
Quantity: | 1000 |
2500 +: | $ 1.84338 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Discontinued at Digi-Key |
Frequency: | 50MHz ~ 4GHz |
P1dB: | 20dBm |
Gain: | 19dB |
Noise Figure: | 6.3dB |
RF Type: | LTE, WiMax |
Voltage - Supply: | 5V |
Current - Supply: | 110mA |
Test Frequency: | 4GHz |
Package / Case: | 32-LFQFN Exposed Pad |
Supplier Device Package: | 32-MCM (5.2x5.2) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF amplifiers are a key element in wireless communication systems for improving signal to noise ratio or power. In particular, the RFDA4005 amplifier (RFDA) is a wideband amplifier, which can be used in almost all electronic communications systems. In this article, we will look at the application field of RFDA4005 and its working principle.
The RFDA4005 amplifier is designed for applications in the 400MHz to 5GHz frequency range. This amplifier can be used for diverse application fields including satellite communications, military radios, Wi-Fi, cell phones, and many more, since the amplifier has a good gain flatness performance and low noise figure in the required frequency range. In addition, the low-noise output of the amplifier is suitable for receivers, while the higher gain is required for transmitters.
The working principle of RFDA4005 is based on a common-source amplifier stage. In this amplifier, an input voltage signal is provided to the source terminal of the amplifier. The strength of the signal is then amplified by the transconductance stage, and after buffering, it is finally provided to the load. In the amplifier, the gain is adjusted by configuring the gate bias current.
The RFDA4005 amplifier has several features that make it suitable for a wide variety of applications. For instance, it has a low-noise transistor that reduces noise levels generated by the amplifier. Further, the amplifier also has excellent linearity, which is necessary for cutting down any inter-modulation distortion. The amplifier also has a low supply current, meaning that it can be used in applications where power conservation is critical. Besides that, the amplifier also supports a wide operating temperature range (-40°C to +85°C), while the wide operating frequency range makes it suitable for different applications.
In conclusion, the RFDA4005 amplifier has a wide range of applications since it supports a wide frequency range of operation and a low-noise transistor. Its excellent linearity and low power consumption make it suitable for different applications, and its wide operating temperature range allows it to be used in extreme environments. With its working principle based on the common-source amplifier stage, the amplifier can be easily configured for different gains.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
RFDA0016TR7 | RFMD | 0.0 $ | 1000 | IC AMP DVGA 6BIT LSB 28-M... |
RFDA0045 | RFMD | 3.86 $ | 1000 | IC VGA AMP 10-850MHZ 32QF... |
RFDA4005 | RFMD | 2.03 $ | 1000 | RF AMP 50-4000MHZ 32QFNRF... |
RFDA2015 | RFMD | 2.61 $ | 1000 | RF AMP 500-2500MHZ 32QFNR... |
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...