RGP10GHE3/54

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Single are electronic devices responsible for the conversion of alternating current (AC) to direct current (DC). The RGP10GHE3/54 is one such device and is primarily used in power system applications. It has a three-phase bridge rectifier topology and a molded package. Its design allows it to offer a good thermal conductivity and several features that allow for effective use in power systems.

The primary purpose of the RGP10GHE3/54 is to convert AC to DC power. This rectifier is designed to offer 10A continuous current, with a peak current of 15A per phase. The reverse voltage it can sustain is up to 1000V DC, with a forward voltage drop of 1.5V. The rectifier’s output meets the standard IEC61439-1/2F and UL60950-1 standards. Its construction allows it to withstand temperatures ranging from -25°C (-13°F) to +80°C (+176°F).

The RGP10GHE3/54 rectifier has a built-in thermal protection which allows it to safeguard against short circuit and overloads. A Metal Oxide Varistor is used to offer extra surge protection and to limit spikes that could damage the rectifier’s dielectric strength. In addition, its terminal block is insulated to ensure electrical insulation and provide anti-leakage protection to nearby personnel.

The RGP10GHE3/54 is widely used in AC/DC power systems, such as photovoltaic inverters and wind power systems. It has a mounting bracket which allows it to be secured with four screws, or with three flat screws. Its aluminum base helps conduct heat away from the component, hence increasing its durability and lifespan. The rectifier also has built-in fasteners which facilitate installation, which is important as this component is often installed in tight places.

The working principle of the RGP10GHE3/54 is relatively simple. On the input side, the device has three AC input terminals, each of which is connected to a diode bridge. The device then converts the AC voltage to a DC voltage, which is then sent to the output terminals. In addition, the component includes an RC filter, capacitor, and a resistor network, to ensure effective rectification and smooth DC output power.

The RGP10GHE3/54 is a reliable and efficient component for AC/DC power systems. Its features make it ideal for a variety of applications, including photovoltaic inverters and wind power systems. Its simple working principle combined with its robust design makes it a great choice for engineers who need a reliable and long-lasting rectifier component.

The specific data is subject to PDF, and the above content is for reference