RL07S154GRSL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are components that are designed to resist the flow of electric current, thus creating electric resistance. These resistors are designed to fit through the holes of a circuit board, which is why they are called “through hole” resistors.

The RL07S154GRSL is a typical example of a through-hole resistor. It is a 15 ohm resistor that is rated for a power dissipation of one watt and is housed in an oversized ceramic package. It has a working temperature range of -55°C to +125°C.

The most common application for the RL07S154GRSL is in DC (Direct Current) applications as a current-limiting, rheostat, or noise reduction component. It is often used in high power systems such as power supplies, electric motors, and regulators. It can also be used as an adjustable feedback resistor in amplifiers or receivers.

RL07S154GRSL works by limiting the flow of current. This is done by the electric resistance of the resistor itself, which causes the current to be simultaneously reduced when the voltage is increased.

The RL07S154GRSL is powered by a metal oxide resistor element. This element is made up of a conductive material which is arranged in an orderly fashion to create the electric resistance. When an electric current passes through the element, the heat created by the resistance heating up the material. The temperature of the resistance increases in relation to the current passing through it.

The amount of current that can be passed through the RL07S154GRSL is determined by its wattage rating. The wattage rating is a measure of how much power the resistor is designed to handle before it begins to overheat and fail.

The described application field of RL07S154GRSL does not only limit itself to DC power applications. It is also well suitable for Pulse modulation applications. Pulse Modulation is a process where alternating high and low voltage supplied to the resistor is used to shape waveforms. It is a technique which is used in pulse formation for communication systems too. With the help of RL07S154GRSLpulse modulation it is again possible to limit, throttle, and control the flow of current through a signal.

Although the RL07S154GRSL is believed to be the best-in-class through-hole resistor, it is important to note that the RL07S154GRSL may not be suitable for all applications. Before using this component, it is always important to check the maximum power rating for the application and select the best possible resistor.

The specific data is subject to PDF, and the above content is for reference