RL07S161GRSL

Series:	Military, MIL-PRF-22684/01, RL07
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	160 Ohms
Tolerance:	±2%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

What is Through Hole Resistors?

Through hole resistors are resistors which are constructed such that their leads protrude through a printed circuit board so they can be connected to other components. Through hole resistors come in a variety of forms - from the simplest single-layer film resistor to complex 3-dimensional metal oxide resistors.Through hole resistors can be used in many applications, from low-power consumer electronics to high-power industrial systems. They provide the electrical and physical strength that is necessary for these applications.

RL07S161GRSL application and Working Principle

The RL07S161GRSL is a 0.35W Through Hole Resistor that is often used in the consumer electronics industry. It is available in 1/2W, 0.25W, 0.3W and 0.5W configurations. This resistor can be used for temperature compensation, pulse folding, impedance matching and protective circuits.The RL07S161GRSL through hole resistor is constructed with a thin-film, non-magnetic substrate and is coated with metal oxide. This configuration results in a very accurate device with high thermal stability. The resistor\'s leads are made of silver-plated nickel which provides excellent electrical and mechanical strength.The working principle of the RL07S161GRSL is based on the principles of Ohm\'s Law. When a voltage is applied across the resistor, a current will flow through it proportional to the applied voltage. The ratio of voltage to current is known as the resistance of the device. The resistance of the RL07S161GRSL is highly accurate and is rated for an accuracy level of ± 0.25%. This accuracy is critical for applications such as temperature compensation, pulse folding and impedance matching.

Conclusion

Through hole resistors including RL07S161GRSL can be used in a variety of applications for consumer electronics, high power industrial systems, temperature compensation, pulse folding, impedance matching and protective circuitry. The RL07S161GRSL specifically is constructed with a thin-film non-magnetic substrate and metal oxide, which gives it an accurate resistance and excellent thermal stability. The device works based on Ohm\'s Law, where a voltage applied across the device causes a current to flow through it proportional to the applied voltage. With an accuracy rating of ± 0.25%, the RL07S161GRSL is an ideal choice for any application that requires a highly accurate, dependable resistor.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description