RM25060-3CR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The RM25060-3CR is a controllable DC switching regulator. It is designed for use in core power supplies in telecommunications and stand-alone systems. The RM25060-3CR is an adjustable DC/DC regulator that can be used to regulate incoming DC input and output feedback voltages. This application field and working principle will be discussed in detail in this article.

The RM25060-3CR is a low-noise, high-efficiency DC switching regulator, which is used to switch DC power from a source to a load at the desired voltage. The RM25060-3CR is designed for use in core power supplies in telecommunications and stand-alone systems. It is also used in distributed power architectures, AC/DC switch mode power supplies, UPS systems, and a variety of DC/DC converters. It is adjustable for 12V, 24V, or 48V input and features a wide output voltage range of 0-50V.

The RM25060-3CR is a synchronous switching regulator that utilizes two separate power FETs for controlling the output current. It has an operating frequency of 400kHz and uses pulse width modulation (PWM) to control the output voltage. The regulator has a wide input voltage range which is adjustable by the user. It can be set for any voltage from 12V up to 48V. The output voltage can be adjusted as well with a range of 0V up to 50V.

The RM25060-3CR has a built-in over-current protection feature that shuts off the output voltage if the current exceeds a pre-determined limit. The output voltage can also be remotely sensed, which allows for correcting the output voltage if necessary. In addition, the RM25060-3CR has a thermal shutdown feature that prevents it from overheating if an overload is present. It can also be programmed to perform symmetrical power sequencing, where power is applied or removed in a precise sequence.

The RM25060-3CR can provide a regulated output current of up to 5 Amps and is ideal for core power supplies in telecommunications and similar applications. With its low noise characteristics, the regulator can minimize the increase in the AC power supply\'s ripple voltage. In addition, the regulator is also designed to reduce power losses, which increases efficiencies in the system.

In conclusion, the RM25060-3CR is a low-noise, high-efficiency DC switching regulator designed for use in core power supplies in telecommunications and stand-alone systems. The regulator has an adjustable input voltage range of 12V to 48V and can provide a regulated output current of up to 5 Amps. It utilizes two separate power FETs for controlling the output current and has a wide output voltage range of 0V up to 50V. It features a built-in over-current protection feature, temperature shutdown feature, and precise power sequencing capabilities.

The specific data is subject to PDF, and the above content is for reference