RN60C7154FB14

Series:	Military, MIL-R-10509/1, RN60
Packaging:	Bulk
Part Status:	Active
Resistance:	7.15 MOhms
Tolerance:	±1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.145" Dia x 0.344" L (3.68mm x 8.74mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Resistors are an important passive electronic component that limits the amount of current flowing through a circuit. Through hole resistors are resistors that are mounted through the holes in circuit boards and soldered into position. One type of through hole resistor is the RN60C7154FB14. This section will discuss the application field and working principle of theRN60C7154FB14.The RN60C7154FB14 is a chip resistor with a wide variety of applications in the electronics industry. It is primarily used in circuit boards and is available in different resistor values that can be used for various applications. It is used to limit and control the amount of current going through an electric circuit, and it prevents any overcharging or overloading of the circuit. It is commonly used in power circuits and motor control circuits.The RN60C7154FB14 uses an adjustable side attachment mechanism for mounting onto the circuit board. It also has a top attachment which helps secure it to the printed circuit board securely. Its adjustable terminal pins enable the resistor to fit into different hole layouts on the circuit board, which makes it suitable for applications with varying hole sizes.The working principle of the RN60C7154FB14 consists of two components. The first is the resistive element, which is made of an alloy of manganese, aluminium, nickel, and titanium. This alloy is heated, and then cooled to create a thin film on the surface of the resistor. The thin film provides resistance to the flow of current, thus creating a voltage drop.The second part of the RN60C7154FB14 is the capacitive element. There is a small layer of dielectric material that is positioned between the resistive element and the contact tip of the resistor. This dielectric material acts as a capacitor, and it helps to reduce the amount of current passing through the resistor. This helps to ensure that the amount of current going through the resistor remains constant and is suitable for the application.The RN60C7154FB14 also has a fully adjustable terminal design. This means that the resistor can be adjusted to fit different hole sizes and types on the circuit board. The adjustable terminal pins also allow for the resistor to be mounted for various applications, such as limiting the current going through a power circuit.Overall, the RN60C7154FB14 is a through hole component used in many different applications. It provides a resistive element for limiting the current going through an electric circuit. It also has a capacitive element which helps reduce the amount of current going through the resistor. With its adjustable terminal pin design, the RN60C7154FB14 is suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description