RN60E2004FRE6

Series:	Military, MIL-R-10509/1, RN60
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	2 MOhms
Tolerance:	±1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Flame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	-65°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.145" Dia x 0.344" L (3.68mm x 8.74mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors

Through Hole Resistors are a type of electrical component that is used in various electronic circuits. They are used to control electrical current, and act as a resistance to it. The components are usually made out of metal and typically consist of two terminals which are connected to each other. They are then attached to a printed circuit board for easy installation. The components have a wide range of uses in electronics ranging from resistors for current control, high voltage protection for prevent saturation in high voltage circuits, regulation of voltage polarity, and thermal influence in circuits.

RN60E2004FRE6 Application Field and Working Principle

The RN60E2004FRE6 is a Through Hole Resistor, specifically a carbon film resistor. Carbon film resistors are made out of carbon glass ceramic which is then coated with a resistor film. This particular resistor is rated for a power rating of 0.06 watts at a size of 2.0mm x 1.25mm x 1.1mm. The RN60E2004FRE6 is typically used in low power circuits, being designed for use in many consumer electronics. Common applications include LED lighting, low voltage DC circuits, and basic precision circuits. It is rated for up to 250V and has a tolerance range of ±1%. The main purpose of this resistor is to control the flow of current by providing a resistance to it. The voltage rating and power rating determine how much current it can handle and how much resistance it will provide. Depending on the application, the resistor can be used in either the series or parallel configuration. In series configuration, the resistor will provide a set amount of resistance to all current flowing in the circuit. In parallel configuration, the resistor will provide the same amount of resistance, but only to the portion of the circuit that is connected to it.

Conclusion

Through Hole Resistors are an essential component in many circuits. The RN60E2004FRE6 is a type of Through Hole Resistor that is specifically designed to handle low power and low voltage DC circuits. Its small size and low power rating make it ideal for use in many consumer electronic designs. It is a reliable and cost effective solution for controlling current flow in electronic circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description