RS1AL RUG

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	50V
Current - Average Rectified (Io):	800mA
Voltage - Forward (Vf) (Max) @ If:	1.3V @ 800mA
Speed:	Fast Recovery = 200mA (Io)
Reverse Recovery Time (trr):	150ns
Current - Reverse Leakage @ Vr:	5µA @ 50V
Capacitance @ Vr, F:	10pF @ 4V, 1MHz
Mounting Type:	Surface Mount
Package / Case:	DO-219AB
Supplier Device Package:	Sub SMA
Operating Temperature - Junction:	-55°C ~ 150°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

RS1AL Ruggedized Single (RS1AL) rectifier diodes are a type of device that is designed to be used in extreme temperature and rough external environment conditions due to their enhanced ruggedness. RS1AL rectifier diodes are typically used as switched voltage regulators, static relays, half-wave rectifiers, and full-wave rectifiers. RS1AL rectifier diodes are designed to be rugged and used in hard environments due to their ability to survive temperatures greater than 200°C and ambient temperatures of -55°C to +125°C. RS1AL rectifier diodes use either a single-sided substrate or a double-sided substrate, depending on the application.

Principle of Operation

An RS1AL Ruggedized Single (RS1AL) rectifier is a semiconductor device that converts alternating current (AC) to direct current (DC). It is used to rectify voltage to a predetermined level. This is done by using diodes that are connected in series-parallel combination within the device.When an AC voltage is applied to the device, the component diodes act as rectifiers that allow current to flow in just one direction. When the voltage level is positive, the anode of the diode is positive and current flows from the cathode to the anode. When the voltage level is negative, the current is reversed and flows from the anode to the cathode. The diodes prevent current from flowing in the opposite direction.The RS1AL rectifier also uses a voltage multiplier to maintain a constant output voltage regardless of the input voltage. The voltage multiplier consists of two or more rectifiers connected in series between the input phase and the output load. The output load has a center-tap connected to the neutral wire, which is the common ground of the RS1AL rectifier. The voltage multiplier allows the device to provide a constant DC output voltage regardless of input signal fluctuations.

Application of RS1AL Rugged Rectifier Diodes

RS1AL Ruggedized Single (RS1AL) rectifier diodes are mainly used in harsh environments, such as industrial and military applications, in order to protect it from extreme temperatures and rough external environment conditions.RS1AL rectifiers are widely used in industrial applications such as welding and power system applications. RS1AL rectifiers are also used as switched voltage regulators in static relays and half-wave or full-wave rectifiers.RS1AL rectifiers are also used in military applications for power supplies, such as in radar systems, communication radios, ground control systems, and various other military electronic equipment. RS1AL rectifiers are rugged and can operate in extreme temperature and rough external environment conditions.

Conclusion

RS1AL Ruggedized Single (RS1AL) rectifier diodes are a type of device that is designed to be used in extreme temperature and rough external environment conditions due to their enhanced ruggedness. They are typically used as switched voltage regulators, static relays, half-wave rectifiers, and full-wave rectifiers. RS1AL rectifiers are widely used in industrial and military applications to provide a constant DC output voltage regardless of input signal fluctuations. RS1AL rectifiers are rugged and can operate in extreme temperature and rough external environment conditions.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description