RSMN-2016L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power line filter modules are designed to suppress different types of noise. It is especially important for the development of wireless communication, power electronics, medical electronics, industrial automation and precision instrumentation. One widely used type of power line filter module is the RSMN-2016L. This type of module is widely applied in many applications such as consumer electronics, communications and medical.

The RSMN-2016L module has a unique operating principle. The module utilizes a combination of inductive, capacitive and resistive components. It filters out high frequency noise from an incoming power line signal, keeping the power line free of excessive noise. The module also provides additional filtering of lower frequency noise components, as well as providing additional noise protection against spikes.

The inductive component of the module provides filtering of higher frequency components of the incoming power line signal. By creating an impedance between the incoming signal and ground, noise is attenuated, while allowing required frequencies to pass through with minimal distortion. The capacitive component is designed to reject lower frequency components of the power line signal while still allowing some of the desired frequency components to pass through. Finally, the resistive component helps to dampen out high frequency components of the power line signal, allowing for better signal control.

In addition to providing filtering at the input and output stages, the RSMN-2016L module also has built in protections for against over-current and surge protection. This can be particularly useful for devices such as computers, cell phones and medical equipment, where the power supply may be suddenly switched on or off unexpectedly.

The RSMN-2016L is designed for applications where higher than normal levels of power line noise are present. It is capable of operating from any DC supply ranging from 5 to 40 VDC, and is compatible with a wide range of AC signals, from 0.5 to 20 kHz. The filter also offers a large amount of attenuation, up to 80 dB, making it suitable for almost any application.

The RSMN-2016L is a very flexible and versatile filter module which can be used in a wide range of applications, including communications, medical, industrial automation, and precision instrumentation. It is easy to install and configure, and offers high performance without compromising signal integrity. Its wide operating range and high-performance filtering capabilities make it an ideal choice for most power line noise filtering applications.

The specific data is subject to PDF, and the above content is for reference