RT8132-16-3M0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes are used in a wide range of applications, and the RT8132-16-3M0 is no exception. This choke is used when a common mode interference exists, and it is also used to provide DC isolation between two or mores signal paths. In this article, we will discuss the applications and working principle of the RT8132-16-3M0.

The RT8132-16-3M0 is a common mode choke that can be used to protect electronic systems from common mode interference. It is available in both insulated and non-insulated versions, so it can be used in a wide variety of applications. The RT8132-16-3M0 has a maximum current rating of 16 amps and a maximum voltage rating of 300 volts. This makes it ideal for use in high-current, low-voltage applications such as power supplies, motor drives, and other switch-mode power supplies.

The RT8132-16-3M0 is typically used to reduce the common mode noise that can be generated from devices such as motors, drives, and other electrical components. This noise is generated when the two differential signals are not equal, resulting in an imbalance in the waveform. The RT8132-16-3M0 chokes the common mode signals to reduce the noise and improve the signal-to-noise ratio of the system. This reduces the interference and helps to protect the components and improve system performance.

The working principle of the RT8132-16-3M0 is simple. The common mode choke is connected in-line between two signal paths. As the two-signal paths transmit data, the RT8132-16-3M0 acts as an inductor and works to reduce the common mode waveform. The RT8132-16-3M0 also provides a DC conduction path between the two signal paths, which helps to maintain the correct signal level and reduce common mode noise. The RT8132-16-3M0 is designed to reduce noise levels up to 50 dB, depending on the frequency of the signals.

In summary, the RT8132-16-3M0 is a common mode choke that is used to reduce common mode noise in a variety of applications. It is available in insulated and non-insulated versions, and has a maximum current rating of 16 amps and a maximum voltage rating of 300 volts. The RT8132-16-3M0 works by connecting in-line between two signal paths, and it is designed to reduce noise levels up to 50 dB, depending on the frequency of the signals.

The specific data is subject to PDF, and the above content is for reference