RURD620CCS9A Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RURD620CCS9A is a rectifier diode array with the purpose of converting alternating current (AC) to direct current (DC). It is made up of 9 diodes, allowing it to perform various functions, including rectification and voltage clamping operations.
The first use of the application field is to convert the AC input voltage to DC output. This is the most common use, and is usually required when rectifying or controlling AC power or signals. When the input voltage is applied, the negative half cycle of the voltage is blocked by the rectifier, and only the positive half cycle is transmitted. The diode and its associated circuitry can be configured in a variety of ways, including full and half-wave rectification as well as voltage clamping.

The second application field for RURD620CCS9A is for voltage clamping. When a high surge of voltage is applied, the diodes will prevent the overvoltage from damaging the circuit by acting as a clamp. This is done by diverting the voltage from the load and dissipating it as heat. This is a widely used method in circuit protection, and can be utilized in a variety of applications where voltage transients are an issue.

The working principle of the RURD620CCS9A is fairly straightforward. When the input voltage is applied, the positive half cycle of the voltage will be rectified by the diode and transmitted to the output. When the negative half cycle is applied, the diode will act as a blocking component, preventing the negative voltage from reaching the output. For voltage clamping applications, the diode acts in a similar manner, but does not completely block the negative cycle of the voltage. Instead, the excess voltage is diverted away from the load and dissipated as heat.

In conclusion, the RURD620CCS9A has two main applications – full-wave rectification and voltage clamping. The devices are composed of nine diodes that are configured in various arrangements to provide these functions. The rectified voltage will be transmitted from the input to the output, while any negative voltage will either be completely blocked or diverted away from the load, depending on the application.

The specific data is subject to PDF, and the above content is for reference