S1GHE3/61T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A diode is an electronic component that has two electrodes. The basic purpose of a diode is to allow electricity to flow in one direction but not another.

A single rectifier diode is basically a one-way gate for electricity. It is a device that allows the current to flow in only one direction.

The S1GHE3/61T is a single rectifier diode that is typically used for power switching applications in power supplies, motor control and inverter circuits. It is a small, unobtrusive diode, but still has very good performance and high reliability.

The rated current of the S1GHE3/61T is 1 ampere. This is sufficient current to handle most power switching applications. Its forward voltage drop is also very low, making it very efficient for low power applications as well.

The S1GHE3/61T is capable of handling up to 175 volts of continuous reverse voltage and can handle up to 500 volts of transient reverse voltage. It is also capable of maximum forward voltage drop of 0.7 volts at 1 amp, and 0.45 volts at the rated current.

The S1GHE3/61T has a standard axial lead-plated package that is designed for use in printed circuit boards. It also has a solder cup that allows it to be soldered directly to the circuit board.

The working principle of the S1GHE3/61T is quite simple. It has two terminals; an anode and a cathode. When current flows in the diode, it is only possible to flow in the forward direction (from anode to cathode). This is due to the internal construction of the diode, which allows the electrons to flow easier in the forward direction than the reverse direction. This is known as "negative resistance".

In summary, the S1GHE3/61T diode is a single rectifier diode that is typically used for power switching applications such as power supplies, motor control and inverter circuits. It has two terminals; an anode and a cathode, and allows current to flow in only one direction. Its rated current is 1 ampere, and it has a low forward voltage drop. It is capable of maximum forward voltage drop of 0.7 volts at 1 amp and 0.45 volts at the rated current. It has a standard axial lead-plated package that is designed for use in printed circuit boards and has a solder cup that allows it to be soldered directly to the circuit board. The working principle of the S1GHE3/61T is based on negative resistance, which allows current to flow in only one direction.

The specific data is subject to PDF, and the above content is for reference