S1JHE3/61T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Single

S1JHE3/61T is a single-phase, low power, silicon bridge rectifier. It is mainly used to rectify AC current into DC current for low power and low voltage applications. This diode is also ideal for applications that require low forward voltage drop and high surge current.

The S1JHE3/61T has two main components, an anode and a cathode. The anode is the positive terminal and the cathode is the negative terminal. The anode is the plus side, while the cathode is the minus side. The anode is connected to the positive side of the AC current and the cathode is connected to the negative side. The diode allows current in only one direction, usually from anode to cathode, while blocking the opposite direction.

The S1JHE3/61T is very popular in many different types of applications, including power supplies, AC/DC converters, LED lighting, voltage regulators, UPS systems, solar panel systems, and more. The low power requirement and lower forward voltage drop, as compared to other rectifier diodes, are two of the main advantages of this particular diode.

The two important terms to understand when discussing diode rectifiers are "forward voltage drop" and "reverse breakdown voltage". The forward voltage drop is the voltage that is dropped across the diode when current is passing through it in the forward direction. The reverse breakdown voltage is the voltage that must be exceeded by the applied voltage before the diode starts to conduct in the reverse direction.

The S1JHE3/61T has a forward voltage drop of 1.2V and a reverse breakdown voltage of 800V. This low forward voltage drop prevents the diode from being damaged due to higher current passing through it. Additionally, the diode does not need to dissipate much heat. The higher reverse breakdown voltage, on the other hand, keeps the diode from being damaged due to high voltage spikes.

The S1JHE3/61T works by passing current from anode to cathode. When the AC current passes through the diode, it is converted to DC current. The voltage of the AC current is dropped by 1.2V and the DC current is output at a constant voltage. This rectification process helps to maintain a stable voltage. Any voltage spikes that occur due to AC current will be blocked by the diode.

The S1JHE3/61T is a reliable and cost-effective solution for rectifying low power AC current into DC current. Low power applications such as LED lighting and power supplies benefit from the low forward voltage drop and high surge current of the S1JHE3/61T. Additionally, the diode can handle high voltage spikes, making it ideal for applications where high spike protection is needed.

The specific data is subject to PDF, and the above content is for reference