Allicdata Part #: | S1JHM2G-ND |
Manufacturer Part#: |
S1JHM2G |
Price: | $ 0.03 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Taiwan Semiconductor Corporation |
Short Description: | DIODE GEN PURP 600V 1A DO214AC |
More Detail: | Diode Standard 600V 1A Surface Mount DO-214AC (SMA... |
DataSheet: | S1JHM2G Datasheet/PDF |
Quantity: | 1000 |
15000 +: | $ 0.02789 |
Series: | Automotive, AEC-Q101 |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Diode Type: | Standard |
Voltage - DC Reverse (Vr) (Max): | 600V |
Current - Average Rectified (Io): | 1A |
Voltage - Forward (Vf) (Max) @ If: | 1.1V @ 1A |
Speed: | Standard Recovery >500ns, > 200mA (Io) |
Reverse Recovery Time (trr): | 1.5µs |
Current - Reverse Leakage @ Vr: | 1µA @ 600V |
Capacitance @ Vr, F: | 12pF @ 4V, 1MHz |
Mounting Type: | Surface Mount |
Package / Case: | DO-214AC, SMA |
Supplier Device Package: | DO-214AC (SMA) |
Operating Temperature - Junction: | -55°C ~ 175°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A diode is a two terminal electronic device with a forward voltage drop that allows current to flow in one direction, but not the other. The S1JHM2G is a single rectifier, which is a type of diode that is designed to allow current to flow in both directions, but will change the electrical power flow depending on the direction. The S1JHM2G is utilized in a variety of applications, including power rectification, signal processing, voltage regulation, power factor correction, and motor control, among others.
The S1JHM2G is a packaged, single rectifier that comprises two independently-controlled gate terminals and a common anode. It is capable of withstanding high voltages up to 40V, with a forward current of 5A. In contrast to conventional rectifiers, this device has higher efficiency and lower voltage drops, allowing for low power consumption and reduced heat generation.
The S1JHM2G works by allowing current to flow in both directions, but it is the gate terminals that determine the power flow through the device. When both anode and gate terminals are connected to the same positive voltage, the current will flow from anode to gate. However, when the gate voltage is reduced in comparison to the anode voltage, the current will be blocked and will not flow through the device. Conversely, if the gate voltage is made more positive than the anode voltage, the current will be forced through the device. This is referred to as "forward-biased rectification", which is used to create unidirectional current flow.
The S1JHM2G is ideal for a variety of applications, including in transformerless power supplies, AC/DC converters, and DC/DC converters. In transformerless power supplies, the S1JHM2G is used as a full wave rectifier, allowing current to flow from an alternating current (AC) source to ground. In AC/DC converters, the S1JHM2G is used as a bridge rectifier, allowing current to flow from an AC source to a DC output. And in DC/DC converters, the S1JHM2G is used as a switching device, allowing current to be switched between two separate DC sources.
The S1JHM2G is used in many other applications as well, including for power factor correction, power rectification, voltage regulation, motor control, and signal processing. In power factor correction, the S1JHM2G is used to convert an AC input power into a DC power, thus reducing power losses and improving the power factor. In power rectification, the S1JHM2G is used to convert AC power into a desired voltage level, and in voltage regulation, the S1JHM2G is used to maintain a precise voltage level for a given load. In motor control, the S1JHM2G is used to regulate the speed of a motor, and in signal processing, the S1JHM2G is used to convert an analog signal into a digital signal.
In conclusion, the S1JHM2G is a single rectifier with high voltage tolerance and low power consumption. It is used in a variety of applications, including power factor correction, power rectification, voltage regulation, motor control, and signal processing. The device works by allowing current to flow in both directions, but the gate terminals determine the power flow through the device. The S1JHM2G is an ideal device for applications that require high voltage tolerance, low power consumption, and precise voltage regulation.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
S1JHE3_A/I | Vishay Semic... | -- | 1000 | DIODE GEN PURP 600V 1A DO... |
S1JHE | ON Semicondu... | 0.06 $ | 9000 | DIODE GEN PURP 600V 1A SO... |
S1JHM2G | Taiwan Semic... | 0.03 $ | 1000 | DIODE GEN PURP 600V 1A DO... |
S1JHR3G | Taiwan Semic... | 0.04 $ | 1000 | DIODE GEN PURP 600V 1A DO... |
S1JHE3_A/H | Vishay Semic... | -- | 1000 | DIODE GEN PURP 600V 1A DO... |
S1JHM3/61T | Vishay Semic... | 0.06 $ | 1000 | DIODE GEN PURP 600V 1A DO... |
S1JHE3/5AT | Vishay Semic... | -- | 1000 | DIODE GEN PURP 600V 1A DO... |
S1JHE3/61T | Vishay Semic... | -- | 1000 | DIODE GEN PURP 600V 1A DO... |
Diodes - General Purpose, Power, Switchi...
DIODE SCHOTTKY 40V 500MA SC76Diode Schot...
DIODE GEN PURPOSE DO-204ALDiode
DIODE GEN PURP 400V 1A DO41Diode Standar...
DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...
DIODE GEN PURP 400V 500MA D5ADiode Stand...