S1MBHR5G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The S1MBHR5G is a surface mount schottky rectifier, with a large current ratings of 5A and a low forward voltage of 800mV at an Ambient Temperature of 25˚C. It is well suited for applications including rectification, coupling and clamping. It features a high temperature 175˚C operating temperature, reverse voltage rating of 200V, and several other characteristics. The S1MBHR5G rectifier has been designed to be a reliable solution to rectification, coupling and clamping applications.

A rectifier is a device used to convert alternating current (AC) into direct current (DC). They have a wide range of applications, and are commonly used in a variety of electrical and electronic products. Rectifiers are also used as a key component in several power supplies, and can be found in automotive, telecommunications and industrial applications. In general, rectifiers are classified as either half-wave or full-wave.

Half-wave rectifiers are devices that are used to convert AC electricity into unidirectional pulsating DC electricity with a single set of diodes. This type of rectifier only allows current to flow in one direction, and it blocks current from flowing in the other direction. The S1MBHR5G is a half-wave rectifier, and is designed to allow rapid switching with low power loss. It is also ideal for applications that have low levels of energy and voltage.

A full-wave rectifier is a device which is used to convert both the positive and negative half cycles of an alternating current to one unidirectional direct current. It works by rectifying both the positive and negative cycles of an alternating current in order to produce only one unidirectional direct current. Full-wave rectifiers provide a higher level of efficiency as compared to half-wave rectifiers, and are commonly used in power supplies, and in audio and radio equipment. However, the S1MBHR5G rectifier is a half-wave rectifier, and therefore not suitable for full-wave rectification applications.

The working principle of the S1MBHR5G rectifier is based on the presence of a P-N junction diode. A P-N junction diode is a semiconductor device, formed by merging two different semiconductor materials such as germanium, silicon and gallium arsenide. When reversed biased, it acts as an insulator. When forward biased, it conducts with a low voltage drop, and typically has a higher speed than most other diodes. The reverse recovery time of a P-N junction diode is very fast, typically within a few nanoseconds.

When an AC source is applied to the S1MBHR5G, current will flow only during one half of each cycle. During the remaining half cycle, the diode remains in a non-conductive state. This is due to the fact that the current only flows in one direction through the P-N junction diode of the rectifier. As a result, the S1MBHR5G rectifier can be used in many applications as a free-wheeling diode, and also as a clipper, and clamping diode.

The S1MBHR5G is an ideal solution for rectification, coupling and clamping applications. Its high current ratings, low forward voltage and fast reverse recovery time make it the perfect choice for a variety of applications, such as automotive, industrial, and telecommunications. Its long life and reliable performance make it a suitable choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference