S2DA R3G Discrete Semiconductor Products

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	200V
Current - Average Rectified (Io):	1.5A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 1.5A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Reverse Recovery Time (trr):	1.5µs
Current - Reverse Leakage @ Vr:	5µA @ 200V
Capacitance @ Vr, F:	30pF @ 4V, 1MHz
Mounting Type:	Surface Mount
Package / Case:	DO-214AC, SMA
Supplier Device Package:	DO-214AC (SMA)
Operating Temperature - Junction:	-55°C ~ 150°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

S2DA R3G application fields and working principle is an important part of diodes. It is a type of rectifier that is widely used in power rectification and motor control in electronic circuits. It consists of one or more of the following components: a step-down transformer, a rectifier, and a filter. The rectifier converts the low voltage to a higher voltage, and the filter removes the high frequency current fluctuations. This paper will discuss the application field and working principle of S2DA R3G rectifier.

Application Fields

S2DA R3G rectifiers are widely used in electronic equipment. They are used in electronic circuits for power rectification, motor control, and various other applications. In power rectification, the rectifier converts a low voltage input signal into a higher voltage output. This is done by allowing electrical current to pass through only one way. The higher voltage output is then filtered and regulated.In motor control, the rectifier is used to adjust the speed of a motor by controlling the amount of current passing through it. This is done by changing the duty cycle of the rectified voltage. The frequency or period of the duty cycle can be adjusted to control the speed of the motor.In addition, S2DA R3G rectifiers can also be used in radio communications, telephone exchange systems, and in medical equipment. They are also used to perform safety testing of electronic components.

Working Principle

The working principle of a S2DA R3G rectifier is relatively simple. It consists of four diodes arranged in a bridge configuration. This arrangement allows the electrical current to flow in only one direction, so that the output voltage is higher than the input voltage.The S2DA R3G rectifier is a single phase unit, meaning it only requires a single phase input voltage. When the input voltage is applied to the bridge connection, the diodes allow the current to flow in only one direction. This causes the output voltage to be higher than the input voltage.The output voltage of the S2DA R3G rectifier is regulated by a filter circuit. This filter removes the high frequency or noisy current fluctuations. The output voltage is then regulated to a certain level by adjusting the duty cycle of the rectified voltage.

Conclusion

S2DA R3G rectifiers are an important type of diode and are widely used in electronics for power rectification and motor control. They are made up of four diodes arranged in a bridge configuration and are used to convert low voltage input signals into a higher voltage output. The output voltage is filtered and regulated by a filter circuit, and the duty cycle of the rectified voltage can be adjusted to control the speed of a motor.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description