Allicdata Part #: | S8010DTP-ND |
Manufacturer Part#: |
S8010DTP |
Price: | $ 0.58 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Littelfuse Inc. |
Short Description: | SCR NON-SENS 800V 10A TO-252 |
More Detail: | SCR 800V 10A Standard Recovery Surface Mount TO-25... |
DataSheet: | S8010DTP Datasheet/PDF |
Quantity: | 1000 |
750 +: | $ 0.52995 |
Current - On State (It (RMS)) (Max): | 10A |
Supplier Device Package: | TO-252, (D-Pak) |
Package / Case: | TO-252-3, DPak (2 Leads + Tab), SC-63 |
Mounting Type: | Surface Mount |
Operating Temperature: | -40°C ~ 125°C |
SCR Type: | Standard Recovery |
Current - Non Rep. Surge 50, 60Hz (Itsm): | 83A, 100A |
Current - Off State (Max): | 10µA |
Current - Hold (Ih) (Max): | 30mA |
Series: | -- |
Current - On State (It (AV)) (Max): | 6.4A |
Voltage - On State (Vtm) (Max): | 1.6V |
Current - Gate Trigger (Igt) (Max): | 15mA |
Voltage - Gate Trigger (Vgt) (Max): | 1.5V |
Voltage - Off State: | 800V |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Thyristors are essential electronic components that are used in various applications, including power control. SCRs ( Silicon Controlled Rectifiers ) are the most common thyristor family and they are used in many industries. One type of SCR that is often used is the S8010DTP which has a variety of applications and working principles depending on the specific application.
Introduction
S8010DTP is a silicon controlled rectifier (SCR) with a plastic encapsulated TO-251 package. It is a four-terminal solid-state switch that can control large currents and high voltages when it is triggered by a low-power gate current. As a thyristor, it typically works as either a switch or a rectifier. It is often used in power control, motor control and AC switching applications, among other things.
Applications
The S8010DTP is most commonly used in three phases AC motor control and switching applications. This SCR works with an external gate current to control the flow of AC current through the different power stages of a three-phase AC motor. It can be used in conjunction with an AC source to provide a switched control of the electrical power to the motor. For these applications, the SCR can be used for both full-wave and half-wave current control.
The S8010DTP is also used in current rectification applications. In this application, the SCR is used in conjunction with a DC power supply to convert the AC power from an AC power source into DC power. This is accomplished by passing the AC power through the SCR which then acts as a rectifier by allowing current to flow through in only one direction.
The S8010DTP is also used in power control applications. It is used in power control circuits to control the voltage and/or current of a DC input. The SCR is also used in AC phase control circuits to control the power being supplied to an AC load. It is often used in conjunction with other AC switches such as Triacs and MOSFETs.
Working Principle
The S8010DTP works by using its thyristor effect to regulate the amount of current that is passed through it. It only allows current to flow through once a positive gate current is applied to the gate terminal. The amount of current that is allowed through is dependent on the amount of voltage being applied, but the current will remain steady once the gate current is applied, until the gate current is removed. The thyristor has latching behavior as well, meaning once the gate current is removed, the S8010DTP will remain in its triggered until another positive gate current is applied to the gate terminal.
The S8010DTP also works by providing protection against overvoltages and short-circuits. When an overvoltage occurs, the S8010DTP blocks the source side of the circuit, keeping the rest of the circuit safe from the excess voltage. Likewise, when a short-circuit occurs, the SCR blocks the source side of the circuit, preventing current from passing through the shorted part of the circuit.
Conclusion
The S8010DTP is an SCR that can be used for a variety of different applications and has several different working principles. It is most often used in motor control, AC switching, and power control applications. It works by using the thyristor effect and can provide protection against overvoltages and short-circuits. As a thyristor, it is a reliable and cost-effective choice for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
LCD-S801C42TR | Lumex Opto/C... | 0.0 $ | 1000 | LCD 8 DIGIT .42" REFLECTI... |
EBC06DRTN-S801 | Sullins Conn... | 3.16 $ | 1000 | CONN EDGE DUAL FMALE 12PO... |
S8016R | Littelfuse I... | 0.0 $ | 1000 | SCR 800V 16A NON-ISOLATE ... |
S8010V | Littelfuse I... | 0.0 $ | 1000 | SCR NON-SENS 800V 10A TO-... |
S8012V | Littelfuse I... | 0.0 $ | 1000 | SCR NON-SENS 800V 12A TO-... |
S8010L | Littelfuse I... | 0.0 $ | 1000 | SCR ISOLATED 800V 10A TO-... |
S8010R | Littelfuse I... | 0.0 $ | 1000 | SCR NON-ISOLATE 800V 10A ... |
S8012R | Littelfuse I... | 0.0 $ | 1000 | SCR NON-ISOLATE 800V 12A ... |
S8015L | Littelfuse I... | 0.0 $ | 1000 | SCR ISOLATED 800V 15A TO-... |
S8015L56 | Littelfuse I... | 0.0 $ | 1000 | SCR 800V 15A ISO TO220SCR... |
S8010DRP | Littelfuse I... | 0.48 $ | 1000 | SCR NON-SENS 800V 10A TO-... |
S8012DRP | Littelfuse I... | -- | 1000 | SCR NON-SENS 800V 12A TO-... |
S8012VTP | Littelfuse I... | 0.55 $ | 1000 | SCR NON-SENS 800V 12A TO-... |
S8010VTP | Littelfuse I... | 0.57 $ | 1000 | SCR NON-SENS 800V 10A TO-... |
S8010DTP | Littelfuse I... | 0.58 $ | 1000 | SCR NON-SENS 800V 10A TO-... |
S8012DTP | Littelfuse I... | 0.6 $ | 1000 | SCR NON-SENS 800V 12A TO-... |
S8010RTP | Littelfuse I... | 0.74 $ | 1000 | SCR 800V 10A TO220 NON-IS... |
S8016RTP | Littelfuse I... | 0.85 $ | 1000 | SCR 800V 16A TO220SCR 800... |
S8016NTP | Littelfuse I... | 0.98 $ | 1000 | SCR NON-SENS 800V 16A TO-... |
S8010NRP | Littelfuse I... | 0.55 $ | 1000 | SCR 800V 10A TO263 |
S8012NRP | Littelfuse I... | 0.55 $ | 1000 | SCR 800V 12A TO263 |
S8012RTP | Littelfuse I... | 0.76 $ | 1000 | SCR 800V 12A TO220 |
S8010NTP | Littelfuse I... | 0.81 $ | 1000 | SCR 800V 10A TO263 |
S8012NTP | Littelfuse I... | 0.81 $ | 1000 | SCR 800V 12A TO263 |
S8015LTP | Littelfuse I... | 0.88 $ | 1000 | SCR 800V 15A TO220 ISO |
S8016NRP | Littelfuse I... | 0.84 $ | 2500 | SCR NON-ISOLATED 800V 16A... |
S8016NARP | Littelfuse I... | 1.17 $ | 500 | SCR 800V 16A TO-263 SMTSC... |
S8010LTP | Littelfuse I... | 0.82 $ | 1000 | SCR ISOLATED 800V 10A TO-... |
S8016RATP | Littelfuse I... | 2.02 $ | 411 | SCR 800V 16A TO-220 NON-I... |
THYRISTOR 600V 12A TO220SCR 600V 18.8A S...
NCR100W-10L/SC-73/REEL 7" Q1/TSCR 850V 1...
SCR SENS 800V 800MA TO92-3SCR 800V 800mA...
THYRISTOR 200V 0.8A SOT54SCR 200V 800mA ...
THYRISTOR 600V 8A TO220SCR 600V 12.6A St...
THYRISTOR 600V 6A TO220SCR 600V 9.4A Sta...