S9S12ZVL32F0MLF

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Description

The S9S12ZVL32F0MLF series is an automotive 16-bit microcontroller series using 180nm NVM + UHV This technology provides the ability to integrate 40V analog components. This family often reuses Features in the existing S12 product portfolio. The characteristic of this family is Enhanced S12Z core and integrated "high voltage" analog module, including voltage regulator (VREG) and local interconnection network (LIN) physical layer. The MC9S12ZVL series contains error correction codes (ECC) on RAM, FLASH and EEPROM for Diagnosis or data storage, fast analog-to-digital converter (ADC) and frequency modulation stage Phase-locked loop (IPLL) can improve EMC performance. The MC9S12ZVL series provides optimized A solution that integrates several key system components into a single device to optimize the system Structure and save a lot of space. MC9S12ZVL series has all the advantages 16-bit MCU performance and efficiency while maintaining low cost, power consumption, EMC and code size The efficiency advantage enjoyed by existing S12 series users. MC9S12ZVL series is Provide 48-pin, 32-pin LQFP and 32-pin QFN-EP. In addition to the I/O ports available in each Module, there are more I/O ports with interrupt function, which can wake up from stop or wait mode.

2. Features

    1. S12Z CPU core

    2. 128, 96, 64, 32, 16 or 8 KB on-chip flash with ECC

    3. 2048, 1024, 128 byte EEPROM with ECC

    4. 8192, 4096, 1024 or 512 byte on-chip SRAM with ECC

    5. Phase locked loop (IPLL) frequency multiplier with internal filter

    6. 1 MHz internal RC oscillator with +/-1.3% accuracy over rated temperature range

    7. 4-20 MHz amplitude controlled pierce oscillator

    8. Internal COP (watchdog) module

    9. analog-to-digital converter (ADC) with 10 -bit or 12 -bit resolution and up to 10 channels available on external pins and Vbg (bandgap) result reference

  10. PGA module with two input channels

  11. One 8-bit 5V digital-to-analog converter (DAC)

  12. One analog comparators (ACMP) with rail-to-rail inputs

  13. MSCAN (1 Mbit/s, CAN 2.0 A, B software compatible) module

  14. One serial peripheral interface (SPI) module

  15. One serial communication interface (SCI) module with interface to internal LIN physical layer transceiver (with RX connected to a timer channel for frequency calibration purposes, if desired)

  16. Up to one additional SCI (not connected to LIN physical layer)

  17. One on-chip LIN physical layer transceiver fully compliant with the LIN 2.2 standard

  18. 6-channel timer module (TIM0) with input capture/output compare

  19. 2-channel timer module (TIM1) with input capture/output compare

  20. Inter-IC (IIC) module

  21. 8-channel Pulse Width Modulation module (PWM)

  22. On-chip voltage regulator (VREG) for regulation of input supply and all internal voltages

  23. Autonomous periodic interrupt (API), supports cyclic wakeup from Stop mode

  24. Pins to support 25 mA drive strength to VSSX

  25. Pin to support 20 mA drive strength from VDDX (EVDD)

  26. High Voltage Input (HVI)

  27. Supply voltage sense with low battery warning

  28. On-chip temperature sensor, temperature value can be measured with ADC or can generate a high temperature warning

  29. Up to 23 pins can be used as keyboard wake-up interrupt (KWI)

3. Applications

    1. LIN nodes

    2. LIN switch panel/user interface

    3. LIN actuators, sensors

    4. HVAC

    5. Lighting controls

    6. Ambient lighting

    7. Seat positioning

    8. Ultrasonic sensors

4. Product packaging picture