SA17

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SA17 are TVS – Diodes (Transient Voltage Suppressor Diodes). The regulator is used to protect sensitive and valuable electrical equipments from voltage transients, such as those generated by switching regulators, relay contact noise, DC/DC converters and other such noise on the power line. There are a variety of designs and types, all of which share the same basic principle of protecting sensitive electronic components from high voltage transients.

SA17 works as a one way circuit. The TVS diode will conduct current in forward direction under normal operating conditions. When a voltage transient is detected, the diode will switch into a reverse conduction mode, and act as a resistor to ensure that the voltage across the diode is limited, and the current is diverted away from the protected components. This prevents damage to the vulnerable parts from the voltage transient.

To identify the type of SA17 diode used for protection, it is important to consider the power requirements for the application. The diode must be selected based on the maximum surge current (in Amps) and the maximum peak pulse voltage (in Volts) that it can handle. The higher the MOPP rating of a diode, the higher the surge current and voltage it can absorb. This means that for applications involving higher voltage transients, stronger diodes must be used.

SA17s are also used in applications involving both AC and DC circuits. They are specifically designed to protect both AC and DC circuits from overvoltage, overcurrent, and lightning strikes. The diode acts as a resistor in both AC and DC circuits, and controls the flow of current, preventing damage to the underlying components.

The SA17 is a powerful protector as it can absorb high voltage transient shocks with amazing speed. Very high peak pulse currents and voltages can be absorbed without causing the diode to be disconnected or damaged. When the positive or negative transient is over, the device quickly resumes its normal functioning after the transient has passed.

In order to ensure the proper working of a TVS – Diode, care should be taken to manage the power cables and connections. Connections should be clean and tight, and the cables should be routed away from potential sources of transients, such as motors, relays, and other high voltage components. A proper installation can help guarantee the performance of the TVS – diode.

In conclusion, SA17 are important components in protecting sensitive electronic circuits from voltage transients. They are robust, fast responding devices with an impressive peak pulse voltage and current rating. Proper installation procedures should be followed to ensure the best performance of the TVS – diode.

The specific data is subject to PDF, and the above content is for reference