SBL1630CTHE3/45

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A SBL1630CTHE3/45 is a rectifier array that commonly used in a variety of applications. It is comprised of four Schottky barrier diodes, each with a specified maximum current rating of 30A. It is capable of providing up to 60A of continuous output current. Its small size, low power dissipation, and robust design make it ideal for high-frequency application fields.

The SBL1630CTHE3/45 has a dual function, acting both as a bridge rectifier and as a voltage regulator. In bridge rectifier applications, it divides the AC source into two separate DC voltages. As a voltage regulator, it limits the peak output voltage to a preset level that remains constant over wide variations of input voltage and load current. This allows the user to maintain a predetermined voltage level at the output of the regulator even at the most extreme input and output voltage conditions.

The SBL1630CTHE3/45 is able to handle high-frequency applications due to its unique architecture. The main component of the rectifier array is a Schottky barrier diode, which has a much lower forward voltage drop than a conventional silicon diode and also exhibits much faster switching behavior at higher frequencies. Additionally, the individual Schottky diodes are connected in parallel in the rectifier array to increase the current carrying capability of the rectifier. This parallel connection allows the rectifier array to easily handle high frequency switching applications.

The working principle of the SBL1630CTHE3/45 is quite simple. It consists of four Schottky barrier diodes connected in parallel, with two diodes connected in series on the input side, and two diodes connected in series on the output side. The voltage drop across each diode is around 200mV and the reverse recovery time of the diodes is very low. When an AC signal is applied to the rectifier array, the two diodes connected in series on the input side block the negative half of the waveform, while the two diodes connected in series on the output side conduct the positive half of the waveform. This results in a DC voltage at the output of the rectifier array.

The SBL1630CTHE3/45 is an ideal choice for a wide range of applications, such as automotive, telecommunications, medical, LED lighting, and consumer electronics, among others. It is also suitable for use in high-frequency switching applications due to its robust design and low power dissipation. The SBL1630CTHE3/45 is an ideal choice for a wide range of rectifier and voltage regulator applications, allowing the user to maintain a predetermined voltage level even under the most extreme input and output voltage conditions.

The specific data is subject to PDF, and the above content is for reference