SBRD81035CTLG-VF01

Series:	Automotive, AEC-Q101
Packaging:	Tube
Part Status:	Active
Diode Configuration:	1 Pair Common Cathode
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	35V
Current - Average Rectified (Io) (per Diode):	5A
Voltage - Forward (Vf) (Max) @ If:	470mV @ 5A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	2mA @ 35V
Operating Temperature - Junction:	-55°C ~ 150°C
Mounting Type:	Surface Mount
Package / Case:	TO-252-3, DPak (2 Leads + Tab), SC-63
Supplier Device Package:	DPAK

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to SBRD81035CTLG-VF01

The SBRD81035CTLG-VF01 is a device belonging to a category of diodes called rectifier arrays. It is used to convert alternating current (AC) electricity into direct current (DC). This is done by allowing current to flow through it in only one direction. It is a device commonly seen in power supply circuits and can be used in a variety of applications.

Applications

The SBRD81035CTLG-VF01 is a versatile device and can be used in a variety of different applications.

• It is often used in motor control circuits, controlling the speed and direction of motor movement.
• It is also used in power supplies, converting alternating current into direct current.
• It can also be used in audio circuits, preventing unwanted noise or interference from entering the system.
• It can be used in radio antennas to rectify the radio frequency signals that are received.
• It is also an important part of communication systems, controlling the flow of data signals between different components.
• The SBRD81035CTLG-VF01 is also found in many household appliances, controlling the power supply of these appliances.

Working Principle

The working principle of the SBRD81035CTLG-VF01 is based on the process of rectification. Rectification is the process of converting alternating current (AC) into direct current (DC). This is accomplished by a diode bridge which consists of four diodes arranged in a bridge configuration. The bridge rectifier allows current to flow through it in only one direction, either allowing current to pass through the diodes or blocking it completely.When an AC voltage is applied to the circuit, the bridge rectifier will allow current to flow in only one direction. The two diodes will become forward-biased, allowing the current to flow through them. As the AC waveform reaches its peak, the two diodes will reach their cutoff voltage and become reverse-biased, not allowing any current to pass through them. The current will then pass through the other two diodes in the bridge, which are always forward-biased. This will then create a pulsed DC waveform.

Advantages

The main advantage of the SBRD81035CTLG-VF01 is its versatility. The bridge rectifier configuration provides a very efficient solution for converting AC electricity into DC. It also provides protection against short-circuiting and overloading. The components of the bridge rectifier are also very inexpensive and easily available.The SBRD81035CTLG-VF01 is also designed to be very space efficient and can easily fit on a small circuit board. It also has very low energy losses, making it an energy-efficient device.

Disadvantages

The main disadvantage of the SBRD81035CTLG-VF01 is that it will not produce a perfectly rectangular DC waveform. This is due to the fact that the two diodes in the bridge will have a certain amount of voltage drop across them and this will cause the waveform to be slightly distorted. This can affect the performance of other components in the circuit.The SBRD81035CTLG-VF01 is also not suitable for high voltage or high frequency applications, as this can cause the diodes to fail due to excessive current.

Conclusion

The SBRD81035CTLG-VF01 is a versatile device which is used in a variety of applications. It is a bridge rectifier, which is used to convert alternating current (AC) electricity into direct current (DC). The bridge rectifier configuration provides a very efficient solution for converting AC electricity into DC. It also provides protection against short-circuiting and overloading. The components of the bridge rectifier are also very inexpensive and easily available. However, it is not suitable for high voltage or high frequency applications, as this can cause the diodes to fail due to excessive current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description