Allicdata Part #: | SDA2000-ND |
Manufacturer Part#: |
SDA2000 |
Price: | $ 104.52 |
Product Category: | RF/IF and RFID |
Manufacturer: | RFMD |
Short Description: | IC RF POWER AMP DIE |
More Detail: | RF Amplifier IC 0Hz ~ 22GHz Die |
DataSheet: | SDA2000 Datasheet/PDF |
Quantity: | 1000 |
10 +: | $ 95.02360 |
Specifications
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Frequency: | 0Hz ~ 22GHz |
P1dB: | 24dBm |
Gain: | 12dB |
Noise Figure: | 5.5dB |
RF Type: | -- |
Voltage - Supply: | 8V |
Current - Supply: | 410mA |
Test Frequency: | -- |
Package / Case: | Die |
Supplier Device Package: | Die |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF amplifiers are used to amplify radio frequency signals. They come in a variety of shapes and sizes, but have one primary thing in common: they all amplify the signal in order to extend its range or increase its strength. SDA2000 application field and working principle is one of the most popular RF amplifiers that currently exists. The SDA2000 is based on GaN (Gallium Nitride) technology and features a wide band power output of up to 2000 watts. This makes it ideal for professional broadcast and military applications that require high power. The amplifier is designed to provide clean, reliable, and efficient amplification of RF signals from 10 MHz to 6 GHz. It can operate in both linear and non-linear modes, and is suitable for use in multiple market segments. The SDA2000 is composed of a power amplifier, an amplifier control module, and a power input connector module. The power amplifier consists of an RF amplifier, a modulator, and a power supply. The RF amplifier amplifies, or increases, the input RF signal. The modulator then receives the amplified signal and modulates or shapes it to the desired RF product. The power supply provides the necessary electrical energy for the amplifier and modulator to function. The amplifier control module is used to monitor the amplifier and provide the necessary control functions. It can be programmed with multiple parameters and settings for optimal performance and stability. The module also provides power supply protection and can provide fault isolation and recovery when needed. Finally, the power input connector module is used to connect the amplifier to the power source. This module contains an RF shielding can to protect against noise and interference. It also contains a noise filter and electrical fuses to protect against power disturbances. In conclusion, SDA2000 application field and working principle is a powerful RF amplifier that can be used for a variety of applications. It uses GaN technology and can provide clean, reliable, and efficient amplification of RF signals from 10 MHz to 6 GHz. The control module provides the necessary monitoring and control functions while the power input connector module protects against external noise and electrical interferences.The specific data is subject to PDF, and the above content is for reference
Related Products
Search Part number : "SDA2" Included word is 2
Part Number | Manufacturer | Price | Quantity | Description |
---|
SDA24N16TA | Diodes Incor... | 0.0 $ | 1000 | TVS DIODE 7V 16SOIC |
SDA2000 | RFMD | 104.52 $ | 1000 | IC RF POWER AMP DIERF Amp... |
Latest Products
HMC667LP2
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
TQM7M9023H
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
HMC406MS8GTR
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
ALM-GP003-BLKG
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
PTMA210452EL V1 R250
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
MGA-30116-BLKG
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...