Allicdata Part #: | SDA3000-ND |
Manufacturer Part#: |
SDA3000 |
Price: | $ 113.51 |
Product Category: | RF/IF and RFID |
Manufacturer: | RFMD |
Short Description: | IC RF POWER AMP DIE |
More Detail: | RF Amplifier IC 0Hz ~ 24GHz Die |
DataSheet: | SDA3000 Datasheet/PDF |
Quantity: | 1000 |
10 +: | $ 103.19400 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Frequency: | 0Hz ~ 24GHz |
P1dB: | 23dBm |
Gain: | 16.8dB |
Noise Figure: | 2.1dB |
RF Type: | -- |
Voltage - Supply: | 8V |
Current - Supply: | 160mA |
Test Frequency: | -- |
Package / Case: | Die |
Supplier Device Package: | Die |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The SDA3000 is a RF Amplifier that is used to greatly increase the strength of a radio frequency signal. It is an integrated power amplifying device that amplifies signals from the antenna input to the antenna output. It is primarily used in wireless communication applications such as radio broadcast, television, cellular phones, two-way radios, and short-wave radio.
The SDA3000 RF Amplifier has a wide range of applications. It can be used in mobile radio applications, aviation and marine communication, radar systems, satellite communication systems, and other similar systems. It can also be used in public safety communications, home theater systems, military communication systems, and in base station equipment.
The SDA3000 RF Amplifier has a maximum input power of +40 dBm and a maximum output power of +55 dBm. It is designed to provide low distortion and low noise operation. The device has a high gain and wide bandwidth that makes it suitable for a wide range of applications. The SDA3000 has a wide temperature range of -40oC to +90oC which makes it suitable for a wide range of applications.
The working principle of the SDA3000 RF Amplifier is based on an active bias scheme. The active bias scheme uses two transistors to regulate the voltage on the drain of the amplifier. The bias voltage is controlled by the transistor at the drain, and the bias current is controlled by the transistor at the source. The bias current changes the gain and the noise figure of the amplifier. The bias voltage and current are adjusted to optimize the gain and noise figure for a particular application. The active bias circuit also helps to reduce the effect of power supply variations on the operation of the amplifier.
The SDA3000 RF Amplifier has a low supply current of 14 mA. It provides low noise operation and an excellent dynamic range. The device also has an input overload level and an output overload level for protection against high signal levels. The SDA3000 RF Amplifier is a high performance device that is suitable for a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SDA3000 | RFMD | 113.51 $ | 1000 | IC RF POWER AMP DIERF Amp... |
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...