SDP806-125PA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure sensors and transducers are devices used to detect and measure the pressure of a fluid or gas. The SDP806-125PA is an example of a pressure transducer that can be used for a wide range of applications. This article will provide an overview of the SDP806-125PA\'s application fields and working principle.

The SDP806-125PA is an industrial-grade pressure transducer with a stainless steel diaphragm and stainless steel housing. It has a pressure range of 0-60 psi, with a resolution of 0.01 psi. The SDP806-125PA has a performance range of 0-500 Hz and a 0.5%FS accuracy. It is also environmental-resistant, with an operating temperature of -20 to +70°C and an ingress protection rating of IP67.

The SDP806-125PA pressure transducer is designed for use in a variety of industrial, agricultural, and medical applications. It can be used in combine harvesters, excavators, automotive cooling systems, and medical oxygen systems. It is suitable for applications in harsh, wet, and corrosive environments, and is able to measure water, oil, and gas pressures. The SDP806-125PA has a fast response time and low power consumption, which make it suitable for mobile applications.

The SDP806-125PA works by converting a measureable pressure into a proportional electrical signal. The device has two components: a pressure sensing element and an electronic sensor circuit. The pressure sensing element is composed of a stainless steel diaphragm that is clamped between the housing and the pressure port. When a pressure is applied to the diaphragm, it is distorted by an amount proportional to the pressure. This distortion is then sensed by the electronic circuit, which converts it into an electrical signal. The signal is then processed by the circuitry and converted into a digital or analogue output.

The SDP806-125PA pressure transducer can be used in a wide variety of pressure measuring applications. It is equipped with a 0.5 - 4.5 Vdc analogue output that is suitable for most commercial signal conditioning systems, and a serial output for use with computer-based systems. The device also has a built-in, programmable frequency response filter, which can be used to reduce noise, vibration, or other disturbances that may affect the accuracy of the measurements. The SDP806-125PA is a reliable, cost-effective solution for pressure measurements in industrial, agricultural, and medical applications.

The specific data is subject to PDF, and the above content is for reference