Allicdata Part #: | SE9301-ND |
Manufacturer Part#: |
SE9301 |
Price: | $ 0.00 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Central Semiconductor Corp |
Short Description: | TRANS NPN BIPOLAR TO220 |
More Detail: | Bipolar (BJT) Transistor NPN - Darlington 80V 10A ... |
DataSheet: | SE9301 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Transistor Type: | NPN - Darlington |
Current - Collector (Ic) (Max): | 10A |
Voltage - Collector Emitter Breakdown (Max): | 80V |
Vce Saturation (Max) @ Ib, Ic: | 2.5V @ 150mA, 7.5A |
Current - Collector Cutoff (Max): | 200µA (ICBO) |
DC Current Gain (hFE) (Min) @ Ic, Vce: | 100 @ 7.5A, 3V |
Power - Max: | 70W |
Frequency - Transition: | -- |
Operating Temperature: | -65°C ~ 150°C (TJ) |
Mounting Type: | Through Hole |
Package / Case: | TO-220-3 |
Supplier Device Package: | TO-220 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The SE9301 transistor is a Single Bipolar Junction Transistor (BJT) specifically designed for audio applications such as amplifiers, preamps, and loudspeakers. This particular model is different from other BJT transistors due to its high-performance characteristics, which is why it is extremely popular for professional audio applications.
The SE9301 has an NPN (negative – positive – negative) configuration which means that it has three terminals: the base, collector, and emitter. The base is the controlling terminal, and when a voltage or current is applied to it, electrons are allowed to flow or be blocked from entering the other two terminals. By controlling the base voltage, the collector and emitter terminals can be connected and disconnected in order to control the flow of current between them.
The SE9301 also features a low noise figure, which is the amount of noise that the transistor creates during operation. This is important in audio applications because the noise level directly affects the sound quality of the audio signal. Its low noise figure also makes it an ideal component for preamplifiers, which require a low noise floor in order to accurately reproduce a signal\'s low level (weak) components.
Moreover, the SE9301 has a low distortion factor, which is the ratio of the magnitude of the output signal to the input signal. Once again, this attribute is important for audio applications, since high distortion levels can lead to poor-sounding audio signals. Low distortion is especially key for sound systems which reproduce sound in a large area and require a consistent sound throughout the listening area.
The SE9301 also has a good frequency response, which is the range of frequencies that the transistor can amplify. It has a wide frequency response and can amplify frequencies in the range of 20 Hz – 30 kHz. This is ideal for audio applications since it covers the entire range of audible sound including sub-bass and treble.
Finally, the SE9301 has a wide voltage range, which is based on the maximum voltage that the transistor can handle. This also makes it especially suitable for audio applications since audio signals tend to have a large range of voltage levels. The SE9301 has a range of up to 50 volts which provides enough headroom for professional audio applications.
In summary, the SE9301 is an ideal transistor for audio applications due to its high-performance characteristics. It has a low noise figure, low distortion factor, good frequency response, and wide voltage range. All of these attributes make it suitable for amplifiers, preamps, and loudspeakers.
The specific data is subject to PDF, and the above content is for reference
GENERAL-PURPOSE TRANSISTORBipolar (BJT) ...
TRANS PNP DARL 30A 120V DIEBipolar (BJT)...
TRANS PNP DARLINGTON DIEBipolar (BJT) Tr...
TRANS GENERAL PURPOSE TO-218Bipolar (BJT...
TRANS PNP 140V 1ABipolar (BJT) Transisto...
TRANS NPN 700V 3A I2PAKBipolar (BJT) Tra...