SET100303

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes, as a key component in electronic circuits, are widely used in daily life. In particular, rectifiers, which has the function of rectifying alternating current to direct current, are one of the most commonly used diode varieties. Rectifiers come in the form of a single diode or an array, and the SET100303 is one such rectifier array.The SET100303 is composed of two rectifiers connected in series with their anodes and cathodes wired in opposite directions. Each unit has a silicon-based chip in its center that has a source, a gate, and a drain in the form of an n-type junction. This makes the current flow between the anode and cathode unidirectional and its resistance increases when the direction is reversed. Thus, the rectifying properties of the rectifier array are determined by the composition of the individual units.In terms of application areas, the SET100303 rectifier array is a particularly practical and functional item. For example, it can be used in power supplies, communication systems, and other devices in which a DC power supply is required. When the alternating current input fluctuates, the devices using the rectifier array can still maintain a stable power supply, making the device more reliable and durable.The working principle of the SET100303 rectifier array is as follows. When the current applied to it is alternating current, the current flow between its anode and cathode will be bidirectional, and will be quickly rectified by the individual rectifiers, such that only direct current passes through and reduces output voltage fluctuation. Specifically, when an alternating current is applied, the voltage across the anode and cathode of the rectifier array is small at the low peak of the input waveform and the tightness of the diode conduction is increased. As the waveform rises, the voltage across the anode and cathode also increases, until it reaches the cut-off point and the current enters the tight conduction state of the diode. The current between the anode and cathode is then only unidirectional, and the rectifying effect is completed.When using the rectifier array, attention should be paid to its polarity. If the polarity of the connection is reversed, the rectifier array may be damaged. Also, it is important to note that the voltage and current corresponding to each rectifier in the array must be kept within the rated forward voltage value and rated forward current value, respectively. This will ensure a long service life and reliable operation of the rectifier array.In conclusion, the SET100303 rectifier array is a practical and efficient diode variety, widely used in power supplies and communication systems to rectify alternating current to direct current. It has an internal structure of two rectifier diodes wired in series, each with a source, a gate and a drain in an n-type junction. The rectifier array must be connected according to the correct polarity, and the corresponding voltage and current going into each rectifier must be kept within the rated forward voltage and forward current value, respectively. With these precautions, the SET100303 rectifier array can provide a steady and reliable power supply for devices requiring direct current.

The specific data is subject to PDF, and the above content is for reference