SET100304

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are components that allow an electrical current to flow in one direction. Rectifier diodes have the special ability to convert alternating current or AC, voltage or current from a sinusoidal waveform to a unidirectional current or DC form. Rectifier circuits can consist of single diode arrangements, center-tap diode arrangements, three-phase diode rectifier circuits, or single-phase diode rectifier circuits. The SET100304 rectifier array is a two-terminal non-isolated, self-contained bridge rectifier in a single package which combines four Schottky barrier diodes with a maximum voltage rating up of to 300V, a maximum current rating of 1A and a reverse leakage current at rated DC blocking voltage of typically 5μA. The part also has a low operating temperature range of -40°C to +125°C while maintaining a low on-state resistance.

A typical SET100304 rectifier diode array will have four diodes arranged in series-parallel connected to for direct currents with high voltage capability and low forward voltage drop. The purpose of this array is to efficiently convert alternating current to direct current. This is accomplished by utilizing the forward and reverse bias characteristics of the diode. When current flows in the forward direction, the diode allows the current to pass through it with minimal resistance and this is known as the forward bias. When current flows in the reverse direction, the diode blocks the current and is known as the reverse bias.

The working principles of the SET100304 rectifier array can be summarized as follows: four Schottky barrier diodes are connected in series, with the anode of each diode connected to the output connection and the cathode of each diode connected to the input connection. When AC voltage, or alternating current, is applied across the two nodes, the diodes in the array, working together as a diode bridge, will conduct during positive half-cycles of input and discontinue the current flow during negative half-cycles of input, thus providing output current in a single direction, parallel to the direction of the applied voltage, and producing a rectified current waveform.

The SET100304 rectifier array has wide applications in the electronic industry. Common applications include online power supply, battery chargers, automotive devices, and regulated power supply circuits. The ability to block large AC voltages makes the SET100304 ideally suited for use in high voltage circuits. These devices are widely used for applications that require a high bridge rectification efficiency or require low losses at high frequencies.

In conclusion, the SET100304 rectifier array is an effective and reliable application in a variety of rectifier applications. This two-terminal device is designed to convert AC voltage into a DC voltage efficiently and reliably, with a maximum voltage rating of up of to 300V, a maximum current rating of 1A, and a reverse leakage current at rated DC blocking voltage of typically 5μA. The array has a low operating temperature range of -40°C to +125°C, while maintaining a low on-state resistance. The applications and working principles demonstrate the value of this device in a variety of rectifier applications.

The specific data is subject to PDF, and the above content is for reference